Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Atwater-Kent 60 console
#1

Here's the Atwater-Kent model 60 console I mentioned in a previous thread. Had it going fully for a short bit with no apparent issues, then the sound cut out. The good news is, after a recheck the speaker is just fine. My digital meter just doesn't have enough oomph to read all the windings in the field coil. It's plenty healthy. The bad news is, something on the chassis must have gave up the ghost. No funky smells or smoke, just kaput! Luckily all the expensive stuff seems fine yet. It will eventually live again. Icon_smile I guess not all radios can be like the Radiola 66 I bought years back for $35. Still works great! Icon_biggrin 

   

No matter where you go, there you are.
#2

I like the AK 60, not sure why. I have one my wife wants gone, but I'm reluctant to turn it out.

[Probably because it's in a cut-down cabinet. I keep hoping for a stretcher base to turn up, but it's been a year and a half and nothing reasonable yet. Maybe a nice Majestic 90 that someone wants rid of for $40? Nope, of course not. The only things I've seen are 4 hours away and the sellers want $350-450, usually in Canada.]

The grill design on yours is kind of unusual. I can't decide if I like it. But I do like the way that cabinet is toned. I hope if you refinish it, you manage to keep the coloring close to original!
#3

(06-18-2016, 03:33 AM)palegreenthumb Wrote:  I like the AK 60, not sure why.  I have one my wife wants gone, but I'm reluctant to turn it out.

[Probably because it's in a cut-down cabinet.  I keep hoping for a stretcher base to turn up, but it's been a year and a half and nothing reasonable yet.  Maybe a nice Majestic 90 that someone wants rid of for $40?  Nope, of course not.  The only things I've seen are 4 hours away and the sellers want $350-450, usually in Canada.]

The grill design on yours is kind of unusual.  I can't decide if I like it.  But I do like the way that cabinet is toned.  I hope if you refinish it, you manage to keep the coloring close to original!

  Yes, I've seen those listed on Vancouver craigslist too, and no matter how much the sellers wish they never sell. $150-200 might be in the ballpark for a working model 60 in good shape. Of course there are also what I call the "Cocaine Induced" prices, like the idiot who thinks his pair of early CB sets is worth $800, after three years and no takers he should have figured things out by now.
   With regard to A.K model 60s they seem to have been offered with several different cabinets, same with model 55s, but one thing you could do is put out an APB on the alternative forum and see if someone has a cabinet, either a good one or a junker that you could harvest the legs and stretchers off of. I think that there is also a swap meet in the Seattle area, there was one in Steveston just recently or soon too, maybe drop into one of those.
Regards
Arran
#4

I did just sell one of these, unrestored, but working (not guaranteed). As I was setting it up for sale it cut out. Also no drastic failure, just no sound. It turned out to be a rusty grid clip on one of the 224s. I have seen this before. Those AK clips were likely to corrode.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#5

I had to replace a grid clip on this one before I tried it out. It was loose on one of the 24's, so I lightly squeezed it and it crumbled. I would say a capacitor or resistor gave up the ghost as the sound just faded out and that was that. Checked the tubes, even swapped tubes with no change.

No matter where you go, there you are.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Hi Cap'n Clock, Unfortunately, I do not have this radio. This is a shame because this should be a good performer. 2...MrFixr55 — 06:48 AM
American Bosch Model 802 auto radio
I think it would come under either American Bosch or United American Bosch. American Bosch made sets for the American We...Arran — 05:53 AM
trying to identify this wire type
Thanks to all for the feedback. As Arran said, it is probably an older replacement and yes it has a grid cap so I will ...georgetownjohn — 09:32 PM
trying to identify this wire type
It's possible that the red wire, actually a grid cap lead, is a very old replacement, I can't remember seeing a pre 1939...Arran — 09:18 PM
Gilfillan Brothers Car Radio?
Hi everyone,  Special thanks to Joe Rossi for tracking down this obscure radio and thanks to others who took up the hun...Antipodal — 08:15 PM
trying to identify this wire type
Here's one source for your wire of many. Take care and BE HEALTHY! Gary P.S. Can't get the right color you need? I ...GarySP — 06:40 PM
trying to identify this wire type
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM

[-]
Who's Online
There are currently 5990 online users. [Complete List]
» 1 Member(s) | 5989 Guest(s)
Avatar

>