Posts: 101
Threads: 11
Joined: Nov 2014
City: Castro Valley, CA
Hi, Folks. I'm back with another request for assistance. Recently, I purchased a 59s for $5 and did the recap, replaced the resistors, and rewound the coils for practice. When I fired it up, there was no sound. Before I take voltage readings (I have to get a battery for my multimeter), do any of you have suggestions or tips?
Here is a link to the schematic:
http://www.nostalgiaair.org/pagesbymodel...013790.pdf
Thanks in advance.
Dave
Posts: 16,266
Threads: 566
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
It goes against my convictions to recommend doing anything before you could look at voltages and test the tubes.
I don't like blind troubleshooting.
Even if I told you to check the speaker (and I don't) - it requires a working meter.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
+1
Looks like a scrunched up model 84. You know real voltmeters don't use batteries.
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 16,266
Threads: 566
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
(07-13-2016, 10:33 PM)Radioroslyn Wrote: +1
Looks like a scrunched up model 84. You know real voltmeters don't use batteries.
Terry
Indeed, looks like the 80jr regen.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 101
Threads: 11
Joined: Nov 2014
City: Castro Valley, CA
Good news, sort of. One of the tubes wasn't seated properly so now the radio hums and hums loudly when I touch the top of the 77 second detector tube. Sounds like a start.
I will get a real voltmeter.
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
At this point you can try putting a 460kc signal to the cap of the 77 closest to the front panel. Adjust #8 and 15 for max signal from spkr.
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
