Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

42-380 recap
#1

Does anyone have a complete list of new capacitors needed to recap a 42-380? Or if there is a specific kit?
#2

There's a schematic with caps listed on Nostalgiaair and the the Audiophool site has a clearer copy of the service bulletin here: http://www.audiophool.com/Philco.html but at the moment that site seems to be down. Hopefully it comes back up soon. Usually only the electrolytic and paper caps need replacing. Check resistors as well, the sometimes need replacement. The wiring in the '39-'49 sets has rubber insulation that often is failing. See: http://www.philcoradio.com/phorum/showth...?tid=14959 for tips/info.
#3

I wuddn't say there's a kit as much as making a list of electrolytic and paper/wax caps from either the parts list or looking at each cap for it's value. And then marking them off on the schematic. Buy small quantities of components needed and save the overage for the next job. (there will be a next job, right?)




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
The speaker table error?
G  10-1/2"       65, 76, 87, 95 Push-Pull 45's 2766 0.7 550 3200 H   10-1/2"    77, 96 Push-Pull...morzh — 09:26 PM
A Marconi model 86
I have a Stromberg, one of the early ones, seems early 30s. This is what I call a back breaker. None of the early Philc...morzh — 08:28 PM
A Marconi model 86
A backbreaker.....PaulPaul Philco322 — 08:12 PM
A Marconi model 86
>>What a behemoth! A Juggernaut.morzh — 07:47 PM
Philco 70 antenna lead
I am not sure I understood about the coils and the mush. I looked an more than one coil in 20, 70, 90, 60, Zeniths and ...morzh — 07:46 PM
A Marconi model 86
:e_biggrin: What a behemoth!  I hope the final result is as much a quality sounding example!  Keep us posted on your pro...GarySP — 07:32 PM
A Marconi model 86
I should add that the double conversion may only be used on the shortwave bands, but I haven't looked at the schematic t...Arran — 07:27 PM
Philco 70 antenna lead
Yes, that wire will not pick up much interference as routed - the RF at that level won't be affected, and if you have st...radio1 — 07:26 PM
Philco model 60
I'm also a member of MARC. Did you attend the Vintage Electronics Expo in Waterford, MI last month? That's where I got...GarySP — 07:22 PM
A Marconi model 86
Dan Double conversion is using two IF converters instead of one. This improves the image response. morzh — 07:15 PM

[-]
Who's Online
There are currently no members online.

>