Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1932 Mystery Cathedral Radio Restore on YouTube
#16

Hey Buzz,
If you have a couple of minutes to do a quick repair I have your mystery set's cousin. Should be a quick repair.
Your volume control isn't really a volume control but a rf gain control that's why it's a much lower resistance than a normal audio volume control. If you would like a bit of an explain of how it work read this starting at post 16. http://philcoradio.com/phorum/showthread...481&page=2

Good videos!


Attached Files Image(s)
           

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#17

(10-07-2016, 06:08 PM)Radioroslyn Wrote:  Hey Buzz,
If you have a couple of minutes to do a quick repair I have your mystery set's cousin. Should be a quick repair.
Your volume control isn't really a volume control but a rf gain control that's why it's a much lower resistance than a normal audio volume control. If you would like a bit of an explain of how it work read this starting at post 16.       http://philcoradio.com/phorum/showthread...481&page=2

Good videos!

You're right...they are cousins haha...Looks like the Philco 10k pot I ordered will work then....thanks, Buzz
#18

buzz
great work Icon_clap Icon_clap   way too funny with dickel Icon_lol



terry that that thing out back and bury it Icon_sad




sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#19

(10-08-2016, 10:45 AM)sam Wrote:  buzz
great work Icon_clap Icon_clap   way too funny with dickel Icon_lol



terry that that thing out back and bury it Icon_sad




sam

Bury it...Icon_sad no way...It will be beautiful... Icon_clap
#20

Part 6 now uploaded Icon_clap

link below to anyone interested

https://www.youtube.com/watch?v=-IeZqu9As2Y
#21

Hello Friends [Image: http://antiqueradios.com/forums/images/s..._smile.gif]

Part 7 now uploaded

link below to anyone interested

https://www.youtube.com/watch?v=csUk_gegQ1o
#22

great work buzz Icon_clap Icon_clap Icon_thumbup
love your video`s


sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#23

Hello

Part 8 now uploaded  Icon_clap
link below to anyone interested


https://www.youtube.com/watch?v=Pf3MoAdVktU
#24

(11-06-2016, 07:32 AM)Buzz Wrote:  Hello

Part 8 now uploaded  Icon_clap
link below to anyone interested


https://www.youtube.com/watch?v=Pf3MoAdVktU

Hi Buzz,
Where measuring sm caps having your test leads twisted together is going to add abt one mmfd per twist, short leads are better than long. And yes capacitors are a handy thing, just think a couple of caps a couple resistors and a 1N34 and you've got AVC!!
Enjoy ur videos.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#25

Hello
Part 9 now uploaded  [Image: http://philcoradio.com/phorum/images/smi...n_clap.gif]
link below to anyone interested

https://www.youtube.com/watch?v=ZaYWHnr0kfA
#26

Buzz, Im glad you showed that new tester you got. I just got one too. Very neat.. Enjoy your videos..

Skip...
#27

(11-12-2016, 08:39 PM)vecher Wrote:  Buzz, Im glad you showed that new tester you got. I just got one too.  Very neat..   Enjoy your videos..

Skip...

Hi Skip..That littler tester certainly came in handy measuring henrys....Buzz
#28

Hello

Part 10 and FINAL episode now uploaded  [Image: http://philcoradio.com/phorum/images/smi...n_clap.gif]
link below to anyone interested

https://www.youtube.com/watch?v=PyVRQENnuFs
#29

Hi Buzz,
Here some music to relax to after all of your hard work.
https://www.youtube.com/watch?v=9Q9vFygSBcM
Sounds a bit like when your working!

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#30

(11-26-2016, 10:15 AM)Radioroslyn Wrote:  Hi Buzz,
Here some music to relax to after all of your hard work.
https://www.youtube.com/watch?v=9Q9vFygSBcM
Sounds a bit like when your working!

yes, that's the Beau Hunks playing The little rascals and laurel and hardy music I use.....Buzz




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
An attempt to remove the Field Coil from a G speaker
Arran The oxidation seems to go deep, a few layers. The break starts right there, but then it will occur on every la...morzh — 07:35 PM
An attempt to remove the Field Coil from a G speaker
Mike, This is just a thought, the are on the coil where the verdigris (green oxidation is) I wonder if that is where ...Arran — 06:32 PM
An attempt to remove the Field Coil from a G speaker
Mike; I've made a one or two spiders by using some card stock, and a razor blade, it took more then one try but they ...Arran — 05:48 PM
Philco 91 Restore Code ??
I wondered about that. Wish there was some place local to get this stuff.dconant — 04:20 PM
Philco 89 indicator light.
Bending the lamp bracket (moving the lamp, that is) can possibly change the shape of the pointer a bit, but not its loca...morzh — 04:01 PM
Philco 91 Restore Code ??
Because the usable power rating of it then is (3,200/20,000)*25W= 4W. Maybe a tad more due to the mass, but not much. Yo...morzh — 03:59 PM
Philco 89 indicator light.
Thank you Dan, that was the trick. I kept trying to rebend the lamp bracket but that wasn't doing anything to help.Jim Dutridge — 02:18 PM
Philco 91 Restore Code ??
20K 25 watt. I thought it was a 20 watt at first.dconant — 01:37 PM
My Philco 37-116 Restore
Nah, too much and not that important.morzh — 01:33 PM
Philco 91 Restore Code ??
What's the full value of that resistor?morzh — 01:31 PM

[-]
Who's Online
There are currently 3996 online users. [Complete List]
» 1 Member(s) | 3995 Guest(s)
Avatar

>