Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1932 Mystery Cathedral Radio Restore on YouTube
#16

Hey Buzz,
If you have a couple of minutes to do a quick repair I have your mystery set's cousin. Should be a quick repair.
Your volume control isn't really a volume control but a rf gain control that's why it's a much lower resistance than a normal audio volume control. If you would like a bit of an explain of how it work read this starting at post 16. http://philcoradio.com/phorum/showthread...481&page=2

Good videos!


Attached Files Image(s)
           

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#17

(10-07-2016, 06:08 PM)Radioroslyn Wrote:  Hey Buzz,
If you have a couple of minutes to do a quick repair I have your mystery set's cousin. Should be a quick repair.
Your volume control isn't really a volume control but a rf gain control that's why it's a much lower resistance than a normal audio volume control. If you would like a bit of an explain of how it work read this starting at post 16.       http://philcoradio.com/phorum/showthread...481&page=2

Good videos!

You're right...they are cousins haha...Looks like the Philco 10k pot I ordered will work then....thanks, Buzz
#18

buzz
great work Icon_clap Icon_clap   way too funny with dickel Icon_lol



terry that that thing out back and bury it Icon_sad




sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#19

(10-08-2016, 10:45 AM)sam Wrote:  buzz
great work Icon_clap Icon_clap   way too funny with dickel Icon_lol



terry that that thing out back and bury it Icon_sad




sam

Bury it...Icon_sad no way...It will be beautiful... Icon_clap
#20

Part 6 now uploaded Icon_clap

link below to anyone interested

https://www.youtube.com/watch?v=-IeZqu9As2Y
#21

Hello Friends [Image: http://antiqueradios.com/forums/images/s..._smile.gif]

Part 7 now uploaded

link below to anyone interested

https://www.youtube.com/watch?v=csUk_gegQ1o
#22

great work buzz Icon_clap Icon_clap Icon_thumbup
love your video`s


sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#23

Hello

Part 8 now uploaded  Icon_clap
link below to anyone interested


https://www.youtube.com/watch?v=Pf3MoAdVktU
#24

(11-06-2016, 07:32 AM)Buzz Wrote:  Hello

Part 8 now uploaded  Icon_clap
link below to anyone interested


https://www.youtube.com/watch?v=Pf3MoAdVktU

Hi Buzz,
Where measuring sm caps having your test leads twisted together is going to add abt one mmfd per twist, short leads are better than long. And yes capacitors are a handy thing, just think a couple of caps a couple resistors and a 1N34 and you've got AVC!!
Enjoy ur videos.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#25

Hello
Part 9 now uploaded  [Image: http://philcoradio.com/phorum/images/smi...n_clap.gif]
link below to anyone interested

https://www.youtube.com/watch?v=ZaYWHnr0kfA
#26

Buzz, Im glad you showed that new tester you got. I just got one too. Very neat.. Enjoy your videos..

Skip...
#27

(11-12-2016, 08:39 PM)vecher Wrote:  Buzz, Im glad you showed that new tester you got. I just got one too.  Very neat..   Enjoy your videos..

Skip...

Hi Skip..That littler tester certainly came in handy measuring henrys....Buzz
#28

Hello

Part 10 and FINAL episode now uploaded  [Image: http://philcoradio.com/phorum/images/smi...n_clap.gif]
link below to anyone interested

https://www.youtube.com/watch?v=PyVRQENnuFs
#29

Hi Buzz,
Here some music to relax to after all of your hard work.
https://www.youtube.com/watch?v=9Q9vFygSBcM
Sounds a bit like when your working!

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#30

(11-26-2016, 10:15 AM)Radioroslyn Wrote:  Hi Buzz,
Here some music to relax to after all of your hard work.
https://www.youtube.com/watch?v=9Q9vFygSBcM
Sounds a bit like when your working!

yes, that's the Beau Hunks playing The little rascals and laurel and hardy music I use.....Buzz




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Need to purchase some accessories for restoration of my Old Philco Radio
COLLEAGUES, Thank you all for such good and important suggestions as how to find good replacement parts. I will go fo...palonso — 07:05 AM
Zenith H725
Here's what the inside of AM IFT2 looked like, and the other pic shows the discs I made to take place of the mica and ke...EdHolland — 07:40 PM
Zenith H725
IF2 will need replacement caps. The arcing was severe enough that the mica is pitted and holed where the HT flashed over...EdHolland — 04:04 PM
My Philco 37-116 Restore
Measuring from center tap like the tube voltages show. Cap 127 is isolated from ground. Cap 127 shown in upper left of p...dconant — 08:05 AM
My Philco 37-116 Restore
Are you measuring relative to the centertap or the GND?morzh — 11:57 PM
Philco 610B oscillator wiring
Still not clear on the wiring interface between the 6A7 and oscillator. After refering to the available schematics and s...Tubester — 07:18 PM
Refinishing Ideas
My 37-116 code 121 is the best sounding radio i have...a daily driver. Since we are talking about "changes". ...poulsbobill — 07:18 PM
My Philco 37-116 Restore
Hello, I finally got brave enough to take the cans off the Expander Unit. Got the grid cap wires replaced and back toget...dconant — 06:50 PM
Zenith H725
I got into the first AM IF can today, and found its mica was cracked. Amazing that it was still working. This one makes ...EdHolland — 06:10 PM
Philco model #20
AHH HA , I got it and can’t thank you fellows enough , when I changed the capacitors I took the advice and did not unsol...onlyrick — 02:24 PM

[-]
Who's Online
There are currently 881 online users. [Complete List]
» 3 Member(s) | 878 Guest(s)
AvatarAvatarAvatar

>