Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1932 Mystery Cathedral Radio Restore on YouTube
#16

Hey Buzz,
If you have a couple of minutes to do a quick repair I have your mystery set's cousin. Should be a quick repair.
Your volume control isn't really a volume control but a rf gain control that's why it's a much lower resistance than a normal audio volume control. If you would like a bit of an explain of how it work read this starting at post 16. http://philcoradio.com/phorum/showthread...481&page=2

Good videos!


Attached Files Image(s)
           

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#17

(10-07-2016, 05:08 PM)Radioroslyn Wrote:  Hey Buzz,
If you have a couple of minutes to do a quick repair I have your mystery set's cousin. Should be a quick repair.
Your volume control isn't really a volume control but a rf gain control that's why it's a much lower resistance than a normal audio volume control. If you would like a bit of an explain of how it work read this starting at post 16.       http://philcoradio.com/phorum/showthread...481&page=2

Good videos!

You're right...they are cousins haha...Looks like the Philco 10k pot I ordered will work then....thanks, Buzz
#18

buzz
great work Icon_clap Icon_clap   way too funny with dickel Icon_lol



terry that that thing out back and bury it Icon_sad




sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#19

(10-08-2016, 09:45 AM)sam Wrote:  buzz
great work Icon_clap Icon_clap   way too funny with dickel Icon_lol



terry that that thing out back and bury it Icon_sad




sam

Bury it...Icon_sad no way...It will be beautiful... Icon_clap
#20

Part 6 now uploaded Icon_clap

link below to anyone interested

https://www.youtube.com/watch?v=-IeZqu9As2Y
#21

Hello Friends [Image: http://antiqueradios.com/forums/images/s..._smile.gif]

Part 7 now uploaded

link below to anyone interested

https://www.youtube.com/watch?v=csUk_gegQ1o
#22

great work buzz Icon_clap Icon_clap Icon_thumbup
love your video`s


sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#23

Hello

Part 8 now uploaded  Icon_clap
link below to anyone interested


https://www.youtube.com/watch?v=Pf3MoAdVktU
#24

(11-06-2016, 06:32 AM)Buzz Wrote:  Hello

Part 8 now uploaded  Icon_clap
link below to anyone interested


https://www.youtube.com/watch?v=Pf3MoAdVktU

Hi Buzz,
Where measuring sm caps having your test leads twisted together is going to add abt one mmfd per twist, short leads are better than long. And yes capacitors are a handy thing, just think a couple of caps a couple resistors and a 1N34 and you've got AVC!!
Enjoy ur videos.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#25

Hello
Part 9 now uploaded  [Image: http://philcoradio.com/phorum/images/smi...n_clap.gif]
link below to anyone interested

https://www.youtube.com/watch?v=ZaYWHnr0kfA
#26

Buzz, Im glad you showed that new tester you got. I just got one too. Very neat.. Enjoy your videos..

Skip...
#27

(11-12-2016, 07:39 PM)vecher Wrote:  Buzz, Im glad you showed that new tester you got. I just got one too.  Very neat..   Enjoy your videos..

Skip...

Hi Skip..That littler tester certainly came in handy measuring henrys....Buzz
#28

Hello

Part 10 and FINAL episode now uploaded  [Image: http://philcoradio.com/phorum/images/smi...n_clap.gif]
link below to anyone interested

https://www.youtube.com/watch?v=PyVRQENnuFs
#29

Hi Buzz,
Here some music to relax to after all of your hard work.
https://www.youtube.com/watch?v=9Q9vFygSBcM
Sounds a bit like when your working!

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#30

(11-26-2016, 09:15 AM)Radioroslyn Wrote:  Hi Buzz,
Here some music to relax to after all of your hard work.
https://www.youtube.com/watch?v=9Q9vFygSBcM
Sounds a bit like when your working!

yes, that's the Beau Hunks playing The little rascals and laurel and hardy music I use.....Buzz




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>