Posts: 15
Threads: 4
Joined: Apr 2013
City: Norwalk, CT
Posts: 1,475
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Very nice. Like that style of cabinet.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Congrats on your acquisition!
As there is no such thing as a 36-604 (it is simply a model 604, also known as 604C), I changed the title of this thread.
I own a 604 also. All original. Or, it was until someone got into the chassis and was unable to make it play properly again (me). I might tackle it again this winter. Or not. We shall see.
Differences between 604 and 37-604:
604 uses standard base tubes. 37-604 uses octals.
604 has a slightly different front end with less screws on the antenna terminal board. 37-604 has more screws on the antenna terminal board.
Otherwise I believe they are identical. I will have to compare the schematics again and see.
--
Ron Ramirez
Ferdinand IN
Posts: 15
Threads: 4
Joined: Apr 2013
City: Norwalk, CT
My thanks for your support Ron.
Ian M. Gordon
NEARC
HARPS
NJARC
Posts: 7,283
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Between the 604 and 37-604C and the 2yr run about 10,000 where made don't know if it qualifies for the rare status. But kwel set none the less. Works well on SW with good sensitivity. Is a little fiddly to service as the rf coils are mounted at the very top of the chassis. If you turn the chassis upside down to service the coils are the first to touch the bench. And it uses a bias cell (small battery).
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 4,108
Threads: 310
Joined: Nov 2013
City: Kings Park NY
I am glad you got one finally Ian. I was super lucky to get one a few years ago for a steal.
I restored the chassis last winter but I am debating restoring the cabinet..
Your cabinet looks real nice. Was it refinished or is that mirror finish a restoration?
Me
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 15,704
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
What's a reasonable price for this radio in a good condition?
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Unrestored, $75-125. Restored/working, $150-250. My guess. YMMV. Others may have differing opinions, and that's okay too.
--
Ron Ramirez
Ferdinand IN
Posts: 15,704
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
The last one that went on eBay was a bit above $200 and I let it go. There is one, a 604, there for $299 right now, restored, according to the seller.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
eBay prices do not always reflect reality. Especially the $100 cathedrals with a BIN price of $499.
--
Ron Ramirez
Ferdinand IN
Posts: 15
Threads: 4
Joined: Apr 2013
City: Norwalk, CT
(11-29-2016, 09:11 AM)Ron Ramirez Wrote: eBay prices do not always reflect reality. Especially the $100 cathedrals with a BIN price of $499.
My 604 was refinished and I feel it was done in the spirit of original appearance. The 37-604 is rarer than I honestly think people assume. They may be many in existence but are in permanent collections. I sought that radio since 2013 and I may have seen only 6 - 8 come up for sale in that time and never a 604 until Kutztown. Obviously it was the art that drove me to it and not investment value. Nice to see one available. In my case, my skills lack so I am happy to pay a bit more for a correct and standout version. As I have also noticed in this hobby that radios evasive for years suddenly appear in multiple amounts. It's all timing I guess.
Ian M. Gordon
NEARC
HARPS
NJARC
(This post was last modified: 11-29-2016, 11:16 AM by Ian M. Gordon.)
Posts: 15,704
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
Ian
No argument that if you see a thing you really would like to have and in your eyes it is worth something, and you can afford it, you should then pay the price.
If this is the radio that made you happy and the price did not bring up the worst parsimonious feelings in you, then I say it is money well spent.
I just spend a bit more than I think it is worth on a Thorens TD-124 turntable that I am yet to clean and lube and.....I wanted that, I had the money for it, I bought it, I am happy and the rest is immaterial.
Congrats on your purchase.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Agree 100% with Mike's comments.
Ian, since you brought up the fact that the cabinet on your set had been refinished...
I knew that it had to have been refinished, but I didn't want to say anything to avoid the appearance of "nit-picking." But since you mentioned it...
How did I know?
The refinisher did not use the proper PHILCO decal.
He should have used DCL-PH8. (Although...looking at their PH8 on their web page, it looks like they have reverted to their earlier, incorrect font. I hope not.) Anyway, if RD is still using the PH8 that I helped them correct, it is the proper decal for 1932-1936 Philcos and has the proper font.
The decal on yours is a 1937 and newer style.
It is apparent to me, based on the number of refinished Philco cabinets I have seen with incorrect decals, that I must be the only person who notices that.
But hey - it is still a great looking radio. Don't take my comments as raining on your parade. I'm just...observing.
--
Ron Ramirez
Ferdinand IN
Posts: 15,704
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
Pictured Ron in the sky looking down on a parade, raining and observing.
Cool picture.
We should order that photoshop picture to someone
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
--
Ron Ramirez
Ferdinand IN
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Philco 91 Speaker Replacement
|
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM |
Restoring Philco 37-604C
|
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one.
Which does not m...morzh — 01:44 PM |
Philco 38-2 Automatic Tuning
|
When you push the lever, you are supposed to rotate the disk to the desired station.
Then the magnetic tuning will acqu...morzh — 01:42 PM |
Philco 38-2 Automatic Tuning
|
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM |
Philco 91 Speaker Replacement
|
How would I go about removing the spider from the cone?dconant — 12:04 PM |
Philco 38-2 Automatic Tuning
|
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM |
Does anyone make photofinish replacements?
|
Here’s the link to the DIY photofinish section of our site:
klondike98 — 09:46 AM |
Delco car radio Peko vibrator converstion issues
|
Hi Richard,
Thx for posting the schematic. As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM |
Delco car radio Peko vibrator converstion issues
|
hello mr Fixr,
The Electro Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM |
Delco car radio Peko vibrator converstion issues
|
How about putting a choke in the power supply?
The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM |
Who's Online
|
There are currently 1713 online users. [Complete List] » 2 Member(s) | 1711 Guest(s)
|
|
|
|