Posts: 667
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
got a bunch of cousins up there ,,Holyrood,,,Bell Island---I love it in thee summer,,,ONLY
Posts: 111
Threads: 2
Joined: Nov 2016
City: marystown nl canada
(12-08-2016, 08:28 PM)BrendaAnnD Wrote: I got to seriously looking under the chassis of this thing... someone who knows NOTHING about electronics has worked on it. There are resistors that have been put in parallel that should be in series (voltage divider), missing resistors, a large cap to ground from the grid of the output tube... lots of fun carp. This is going to be a lot of work.
when you say large cap do you mean electrolytic cap
Posts: 111
Threads: 2
Joined: Nov 2016
City: marystown nl canada
(12-09-2016, 06:18 PM)Kenneth F. Besso Jr. Wrote: got a bunch of cousins up there ,,Holyrood,,,Bell Island---I love it in thee summer,,,ONLY
do any of your family out there do radio repair
Posts: 4,707
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
(12-08-2016, 08:48 PM)morzh Wrote: The caps...CapXon....never heard of these.
Seriously. You need to get someone with experience to look at it.
Mike;
Consider yourself fortunate that you haven't. Capxon is one of those Chicom mystery brands of caps that are on the hall of shame list over at badcaps.net. They are so bad, and have caused so many premature equipment failures, that people call them Craps-on as well as other more expletive names. In this case it is on the cathode of the 6F6G tube so even if it was dead shorted it wouldn't kill anything, but it surprises me that Just Radios would pedal such an infamous brand of capacitor.
Regards
Arran
Posts: 111
Threads: 2
Joined: Nov 2016
City: marystown nl canada
Posts: 667
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
NO,,sorry,,they don't repair radio's
Posts: 111
Threads: 2
Joined: Nov 2016
City: marystown nl canada
got the motor boating fixed
Posts: 15,825
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
What was it?
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 111
Threads: 2
Joined: Nov 2016
City: marystown nl canada
it was a wire shorting out the primary and secondary of one of the if transformers
Users browsing this thread: 5 Guest(s)
|
|
Recent Posts
|
|
Philco 60 Squealing
|
| I seem to remember eliminating a squeal by changing the IF frequency by a few KHz. Not that you should put too much tru...fenbach — 08:48 PM |
|
Philco 42-390, code 121 speaker
|
| These speakers pop up on eBay regularly, even if at bloated prices.
Honestly, have not seen many parts on swapmeets.morzh — 08:38 PM |
|
Philco 38-7 Speaker
|
| The put-put is not like the speaker problem.morzh — 08:29 PM |
|
Mission Bell Model 19A Car Radio
|
| Hello everyone,
As mentioned in my last post I was going to see if the vibrator / rectifier section could be persuaded...Antipodal — 08:21 PM |
|
Philco 60 Squealing
|
|
Wondering if I did it backwards.
If a coil was wound backwards, the oscillator would not work at all.
Old school...Chas — 07:23 PM |
|
Philco 38-7 Speaker
|
| 4-ohm speaker. Black, Green leads.tludka — 07:00 PM |
|
Philco 42-390, code 121 speaker
|
| #87 on the schematic.
This radio had a 8" Zenith speaker attached to it when I got it. I do don't know the hist...Stevelog — 06:39 PM |
|
Philco 60 Squealing
|
| I'm pretty sure I now have the litz wire soldered. This did not make any difference. Back in April I rewound the seconda...dconant — 06:25 PM |
|
Philco 38-7 Speaker
|
| Just to make sure, you chose either 4 ohm into 5K or into 10K? (blk-org or blk-grn)morzh — 06:23 PM |
|
Philco 38-7 Speaker
|
| I have let this one sit because of other duties. Now I am back, and I have a couple of questions. I hooked up a Hammond ...tludka — 05:34 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
