Posts: 23
Threads: 4
Joined: Jul 2013
City: Los Angeles, CA
It's been a while since I've been here. I'm still having OCD issues with my 39-6. The previous owner replaced the needle/pointer with the wrong type. In short, this pointer is supposed to have two needles 180 degrees from each other, this one has only one needle.
Does anyone sell parts for this, or a reproduction? I've been through the forum with the parts vendors, but no one I saw has tuner needles.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
No one reproduces the 39-6 dial pointer. You'll have to find one from a junk set. A 39-6, 39-7 or 39-8 will do.
--
Ron Ramirez
Ferdinand IN
Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Just as a aside you may want to mount a thin piece the clear plastic (like from a baked good come in) to protect the gold foil on the dial face. If the dial pointer rubs the foil it tears from it's paper backing and can make a mess of the dial graphs.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
(This post was last modified: 01-23-2017, 01:21 PM by
Radioroslyn.)
Posts: 23
Threads: 4
Joined: Jul 2013
City: Los Angeles, CA
Thanks for the suggestions - especially about the foil. I'll keep a lookout.
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
