Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 70 Brads
#1

Hi guy's I am starting to restore a model 70, the escutcheon is in great condition but it is missing the brads that hold it to the radio. Where can I find some to match the original ones.

Thanks
I probably will have other questions about this radio in the future.
Jim

Jim
Spring Lake MI
#2

Hopefully someone will have a more specific answer but I would go to a local hardware, one of those places that has stuff everywhere and a guy that's about 90 years old still working there that knows where everything is.... they don't have many of those anymore but you might find something. Icon_smile
#3

Look here    https://www.mcmaster.com/#nails/=15338y5     Try stock number 97936 A 109

Steve

M R Radios   C M Tubes
#4

Found some little brass nail's at ACE, just had to cut them to length.

Jim
Spring Lake MI
#5

Icon_thumbup Icon_thumbup




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 38-7 Speaker
I have let this one sit because of other duties. Now I am back, and I have a couple of questions. I hooked up a Hammond ...tludka — 05:34 PM
Philco 42-390, code 121 speaker
>>A closer examination of the very small print schematic indicates that the speaker is a PM type. This shows a ...morzh — 05:18 PM
Philco 60 Squealing
Litz is typically tinned by simply rubbing it with the soldering iron tip while immersed in solder (and a bit of rosin f...morzh — 05:14 PM
Philco 6K7
The suppressor grid (if by G3 you mean the S) is usually at the Cathode potential, which in this caes is GND. I am not ...morzh — 05:10 PM
Philco 16B Parts
Thanks for the reply. Unfortunately the radio was removed before bidding was over so I didn't get a chance to bid.dconant — 04:10 PM
Philco 16B Parts
Hi Dan, Mike is correct, there's a lot of painted stuff on the chassis but it looks pretty good. The sm is all there,sp...Radioroslyn — 03:50 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Hi Cap'n Clock, Unfortunately, I do not have this radio.  This is a shame because this should be a good performer.  2A...captainclock1988 — 03:43 PM
Philco 42-390, code 121 speaker
Using a 5W  1.5k  ceramic resistor in place of the field coil and using a 4 ohm PM speaker, I was able to bring the radi...Stevelog — 02:57 PM
Philco 60 Squealing
I have taken out the 2nd IF and found a problem or not. I believe the coils are litz wire. There is a very small strand ...dconant — 02:13 PM
Philco 6K7
I am restoring a Philco 37-60. The am reception is very good, but the shortwave is very weak. Run 6 Philco removes the g...bobbyd1200 — 01:35 PM

[-]
Who's Online
There are currently 4833 online users. [Complete List]
» 3 Member(s) | 4830 Guest(s)
AvatarAvatarAvatar

>