Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Webster Chicago 56-13 Changer Template
#1

   
I have a Webster Chicago (Webcor) model 56-13 that came with a cabinet that originally contained an E H Scott Metropolitan 16A. This changer is in the changer compartment, but the drop-in mounting board does not match this changer. I would like to get a mounting template of the mounting board for the Webster Chicago 56-13 so I can cut one that will actually fit this changer. The spring mounting wells do not line up with the springs on this changer and I also believe the projection of parts around the tone arm are going to strike some of the wood on the existing mounting board.

Even a picture of the correct mounting board would help. I could trace out the positions of the spring mount centers on a piece of cardboard and sketch in the general outline of the usual cut-out for the model 56.

Thanks in advance.

This particular changer actually came from a GE radio and has the GE VR cartridge and stylus in it.

Joe
#2

Hmmm,
I cant help but I will ask on my record player group...


Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#3

(04-12-2017, 06:07 AM)OldRestorer Wrote:  Hmmm,
I cant help but I will ask on my record player group...


Icon_smile

OldRestorer;

Thanks for any information you can find! These older units are difficult to find information about mounting arrangements. It is easy enough to find Rider's data on servicing them, but not anything on mounting of the units.

Joe




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco 91 Speaker Replacement
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM
Restoring Philco 37-604C
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one. Which does not m...morzh — 01:44 PM
Philco 38-2 Automatic Tuning
When you push the lever, you are supposed to rotate the disk to the desired station. Then the magnetic tuning will acqu...morzh — 01:42 PM
Philco 38-2 Automatic Tuning
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM
Philco 91 Speaker Replacement
How would I go about removing the spider from the cone?dconant — 12:04 PM
Philco 38-2 Automatic Tuning
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM
Does anyone make photofinish replacements?
Here’s the link to the DIY photofinish section of our site: klondike98 — 09:46 AM
Delco car radio Peko vibrator converstion issues
Hi Richard, Thx for posting the schematic.  As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM
Delco car radio Peko vibrator converstion issues
hello mr Fixr, The Electro  Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM
Delco car radio Peko vibrator converstion issues
How about putting a choke in the power supply? The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM

[-]
Who's Online
There are currently 3314 online users. [Complete List]
» 1 Member(s) | 3313 Guest(s)
Avatar

>