Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Zenith 4-T-51
#1

After over a week of trying to get schedules together, I finally picked up this rather small Zenith console this evening. The guy even met me halfway, saving me some miles and I actually got to try a Steak and Shake for the first time ever during the trip.   Icon_smile  Overall, the radio seems to be in very good condition with a couple issues that need ironed out. The additional IF can someone added to the back of the chassis seems only linked into antenna wire, with no hacking visible to the chassis. I guess he was selling the radio for his parents who lived in Brunswick, OH and he lives up in Cleveland, which added another issue getting things to jive with his parents to pick up the console. Since this was built the same year as Zenith's Stratosphere and the Baby Strats, I am going to call it the Micro Strat!  Icon_lol

   

   

I don't think the volume control shaft is supposed to pull out like this! Icon_eek  Ouch!
   

Note: I did have to use a little Auto-Enhance with my photo editor as it seems my camera is dying. It now takes rather washed out pictures. Icon_thumbdown  But, the radio really does look about that sharp in person!
Edit: Actually, it looks better in person. Seems even with auto-enhance, the pictures didn't come out great.

No matter where you go, there you are.
#2

Cool,
It looks a little like an Airline 62-123.
I like Icon_smile

Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#3

I'm glad you finally got to try Steak and Shake..... next you'll say you've never tried White Castle Icon_eek 

Anyway, I'm glad you got that radio, it's one I've never seen before and it looks a lot better in your pictures than the Craigslist ad.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#4

(06-04-2017, 08:12 AM)Eliot Ness Wrote:  I'm glad you finally got to try Steak and Shake..... next you'll say you've never tried White Castle Icon_eek 

Anyway, I'm glad you got that radio, it's one I've never seen before and it looks a lot better in your pictures than the Craigslist ad.

Thanks! I also like the size of it and just the overall design.
Yes, where I live there are certain places we just don't have. The nearest White Castle was up near Akron, OH, but it is now gone. Yes, I did get to go there a few times at least. The closest Steak and Shake is about 20 miles away from me up in North Canton, OH.
Now, getting back to the radio, is there a possibility that control can be repaired? I haven't pulled the chassis for inspection yet.

No matter where you go, there you are.
#5

(06-04-2017, 11:42 AM)Jayce Wrote:  .......Now, getting back to the radio, is there a possibility that control can be repaired? I haven't pulled the chassis for inspection yet.

Maybe, but you'll need to pull the chassis and take a closer look at the pot.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#6

I pulled the chassis and, other than being very gummed up, the pot seemed fine. It basically uses a pressed in shaft to work the control pot, which is odd. After several doses of control cleaner to loosen it up, I was able to press the shaft back in tight enough to work for off-on and volume functions with no issues as long as I don't go wild with it. Radio passed the transformer test and actually pulled in a few stations at low power on the bulbs. All good signs! Icon_smile There are quite a few capacitors crammed under that little chassis though! Almost an un-Zenith like amount!

No matter where you go, there you are.
#7

Jayce, I found your little console in my Zenith brochures.  In 1936 it sold for $39.95 and the table version, the 4-T--26, sold for $20.00.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#8

Ok, I figured it wasn't a high cost model when it was made. Information seems to be hard to find about either version except there was an early and a later version.

No matter where you go, there you are.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Correct model 84 Ac plug an cord type
Hello Arran Yes, I also like the lampshade style plug ! Sincerely Richardradiorich — 08:46 AM
Restoring Philco 38-14
Hello morzh, Nice explanation on the x and y capacitors and glad you are narrowing down the issue with this set ! Si...radiorich — 08:43 AM
Correct model 84 Ac plug an cord type
From what I read Philco went to using brown rubber power cords in 1936, so cloth was used in the 1935 and earlier models...Arran — 11:25 PM
Correct model 84 Ac plug an cord type
Hi Bruce, I have not worked on an 84, but in general, power cords for almost any radio prior to 1938 was cloth covered...MrFixr55 — 08:34 PM
Restoring Philco 38-14
OK, well, so after staring at the sch again, I realized the problem had to be the #12/12A padder. I put a scope on the o...morzh — 08:15 PM
Correct model 84 Ac plug an cord type
Hello Bruce, I mostly use brown far as my cloth powercords go ! Here is the plug that I have used bakelite Acorn style...radiorich — 08:05 PM
Correct model 84 Ac plug an cord type
Looking for as correct as can find the right Ac plug an the correct colored cloth line. Ive seen many old photos but mos...Bruce — 04:13 PM
Restoring Philco 38-14
Rod Two Y-caps make sense if you use them from L/N to the chassis; this is only makes sense in the transformer radios...morzh — 10:11 AM
Restoring Philco 38-14
Mike, I'm curious about a specific use of he Y cap. Lately I've seen a single cap across the power transformer primary. ...RodB — 09:01 AM
Restoring Philco 38-14
hello morzh , That sounds like a plan ! Sincerely Richardradiorich — 07:45 AM

[-]
Who's Online
There are currently 4023 online users. [Complete List]
» 3 Member(s) | 4020 Guest(s)
AvatarAvatarAvatar

>