Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

47-1230 antenna problem
#1

I received a philco 47-1230 as a gift and am wanting to attach an outdoor antenna. The trouble i am having is how to attach it to the set. The set uses an am loop antenna that is built in. I tried disconnecting one side of the built in antenna and attaching a longwire antenna. This did not work. When the oem antenna is disconnected, the set goes deaf even with the long wire attached to terminal 1. The best i have done is leaving the oem antenna in place and hooking the longwire to terminal 1. The problem with this is that the oem antenna picks up all the electrical noise from inside the house, and whistles between stations when tuning. I have stewed over the schematics with no ideas coming to mind. One idea that hit me while typing this was taking some wire and making loops intertwined with the factory antenna, and hooking that to the longwire. The set was apparently built with local stations in mind. My problem is that i dont have any locals around me. During the day,the set gets one station very faintly.
#2

The simple answer is to leave the loop connected and connect a small mica cap (like 50 or 100mmfd ) to the ungrounded side of the loop connection. Connect the long wire to the other end of the cap.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

What does hooking a cap do for this?
#4

Couples the signal from the antenna to the rf input circuit of the radio.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#5

Ok. What is the benefit of coupling the antenna with a cap as opposed to hooking it up a straight?




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Hickok 288x
They worked for 85 years as .05's and my other machine which operated perfectly has them. Doubt thats the issue. Yes saf...daveone23 — 09:01 AM
462ron
LOL@ MrFixr. I remember an encounter with my first tube radio.. I think I have posted this before. Back when I knew just...462ron — 08:07 AM
HiFi (Chifi) tube amp build - but my own design.
I absolutely attribute my reaching 63 to God's benevolence, but this apart, it has never occurred to me to tap anything ...morzh — 07:55 AM
Does the 20 Deluxe use photofinish?
No, it did not use photo-finish. It is veneer with the shading on the front of changing darkness.morzh — 07:52 AM
Philco 66 No Plate Voltage
We could also mention the factory miswire of the tweeters on 38-690. Or the fact that even with this fixed, one could no...morzh — 07:51 AM
462ron
Just a thought here, those caps C33-C34 are .05mfd. That high of a value can possibly pass enough 60hz current to cause ...462ron — 07:37 AM
Hickok 288x
Isnt the chassis and ground the same on this machine? My other 288x that works is an identical machine and it does not h...daveone23 — 07:05 AM
Just got a 49-1613 need to know...everything!
According to the gallery, it has an AM/FM radio, with a two speed phonograph, the 78 side is an automatic changer, the 3...Arran — 01:32 AM
Philco 37-???
During the 1937 and 38 model years Philco was big on the concept of what would now be called a "modular" desig...Arran — 12:23 AM
Replicating (dogbone) resistors what method have you used ?
Hello Dale, I am talking about using the RTV as the mold. Well John, yes, I have seen that design I think it was one o...radiorich — 11:55 PM

[-]
Who's Online
There are currently 2867 online users. [Complete List]
» 3 Member(s) | 2864 Guest(s)
AvatarAvatarAvatar

>