Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Bakelite capacitor block
#1

Restoring a Philco 650 and have 6 of the bakelite capacitor blocks to rebuild. I used to go to the Philco site where there was a section of diagrams showing internal wiring for the different blocks. With the remake of the site the list and the diagrams are gone. Anyone know where the information exists?

The other parts values are missing as well. Help.

Thanks.
#2

Find it here  
http://philcoradio.com/phorum/showthread.php?tid=14964

The book was just listed very good book too   Icon_thumbup
http://philcoradio.com/phorum/showthread.php?tid=16946

Sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#3

Sam,

Thanks so much. I'm in your debt God Father.

John
#4

If you're referring to the Philco Repair Bench, try the Wayback Machine. The entire old site is archived.

https://web.archive.org/web/201603242327...lokcap.htm

Blessings,
Jeff W.
Jonesboro, Arkansas

http://jeffsradios.weebly.com

God loves you as you are, not as you should be, because none of us are as we should be. - Brennan Manning
#5

Thanks Jeff. Great find.
#6

(07-18-2017, 06:47 AM)jmac3ky Wrote:  Thanks Jeff. Great find.

I'm afraid I can't take credit. Someone else here on the Phorum pointed it out recently.

Once I saw it, I immediately went through all the archived pages and saved PDFs as a reference. Icon_thumbup

Blessings,
Jeff W.
Jonesboro, Arkansas

http://jeffsradios.weebly.com

God loves you as you are, not as you should be, because none of us are as we should be. - Brennan Manning
#7

Chuck is in the process of updating his Philco Repair Bench website so the info should all reappear there in time.




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Hickok 288x
One problem i noticed is there is no real voltage on the 31 caps, 20uf elec. On the probes, good machine X1=8ohms X10...daveone23 — 02:50 PM
Replicating (dogbone) resistors what method have you used ?
John did you see the domino style capacitors that he made too. No, I did not see those Richard. I'll have to try and...Eliot Ness — 02:19 PM
Philco 89B code 123 newbie
Back to working on this, pretty much everything is done minus the RF coil, which I'm putting off until last.  Thanks for...Kurt P — 02:07 PM
Does the 20 Deluxe use photofinish?
I recently bought a can of oms and it now says Lo-odor mineral spirits. When I use citrus stripper I leave it on for...RodB — 11:09 AM
Does the 20 Deluxe use photofinish?
It's on a scale of how bad is it compared to... Naphtha, chlorine bleach, mek, and lacquer thinner it's odorless.Radioroslyn — 10:26 AM
Does the 20 Deluxe use photofinish?
Yeah, always wondered why they call them spirits "odorless". It sure enough smell like a gas station.morzh — 10:10 AM
Does the 20 Deluxe use photofinish?
I usually don't do any sanding till all the stripping is done. The veneer on the cabinet is thin and it is easy to sand ...Radioroslyn — 09:49 AM
HiFi (Chifi) tube amp build - but my own design.
As I remember it, the shock from that B+, about 250VDC, felt worse than the shocks I experienced from 220VAC.morzh — 09:14 AM
Hickok 288x
They worked for 85 years as .05's and my other machine which operated perfectly has them. Doubt thats the issue. What ty...daveone23 — 09:01 AM
462ron
LOL@ MrFixr. I remember an encounter with my first tube radio.. I think I have posted this before. Back when I knew just...462ron — 08:07 AM

[-]
Who's Online
There are currently 3888 online users. [Complete List]
» 2 Member(s) | 3886 Guest(s)
AvatarAvatar

>