08-01-2017, 08:15 PM
Hoping for some help with a few loose wires on this radio. Apparently it is the Canadian version of a popular chassis. It worked fine 30 years ago but storage and transit has taken its toll. There are two wires that have come un-soldered. I have included photos to help identify the component and loose wire.
https://www.flickr.com/photos/157292344@...res/6256R5
Wire #1 comes off the tall skinny thing next to the tuner, it is greenish/grey in color
Wire #2 comes off a resistor attached to the chassis down at the same end as the tall skinny thing in image 1.
From my descriptions it should be apparent that i'm a Newb. Any simple explanations or tips would be greatly appreciated.
https://www.flickr.com/gp/157292344@N02/781C64
https://www.flickr.com/photos/157292344@...res/6256R5
Wire #1 comes off the tall skinny thing next to the tuner, it is greenish/grey in color
Wire #2 comes off a resistor attached to the chassis down at the same end as the tall skinny thing in image 1.
From my descriptions it should be apparent that i'm a Newb. Any simple explanations or tips would be greatly appreciated.
https://www.flickr.com/gp/157292344@N02/781C64
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
