08-14-2017, 07:02 PM
![Icon_thumbup Icon_thumbup](https://philcoradio.com/phorum/images/smilies/icon_thumbup.gif)
good questions and a good thread!
Philco 20A - Electronic Restoration Questions
08-14-2017, 07:02 PM
![]() good questions and a good thread!
08-19-2017, 03:41 PM
The replacement caps from Sal just came in today! Earlier than I had expected
![]() Is there a particular order in which they should be replaced? I'd like to test the radio after each replacement. Should I start with the big cap block? Begin with the smaller ones and move my way up to the larger ones? - Eric Philco 20A Zenith T825
08-19-2017, 08:29 PM
#26 is a good place to start.
When my pals were reading comic books I was down in the basement in my dad's workshop. Perusing his Sam's Photofoacts Vol 1-50 admiring the old set and trying to figure out what all those squiggly meant. Circa 1966 Now I think I've got! Terry
08-20-2017, 01:28 AM
If testing means powering up, I'd replace them all first.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
08-20-2017, 09:38 AM
I check ALL,,,NEW,,,,capacitors and resistors,,,,(Before installing),,,,tubes first ,,coils,,transformers
08-21-2017, 09:08 AM
I wouldn't bother powering up and testing after you replace each capacitor or you'll possibly fry something and probably be at this for months. It's safe to assume every capacitor in there except the one mica will need replacement. If you want to try and keep some of the old resistors, you can de-solder one lead and check with your mulitmeter. I'd be surprised if most or all of those didn't need replacement too.
Greg "We are here to laugh at the odds and live our lives so well that Death will tremble to take us."
« Next Oldest | Next Newest »
Users browsing this thread: 1 Guest(s) |
![]() |
![]() |