Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

ID on this one tuber...?
#1

Any thoughts on manufacturer and model for this one tube radio or tuner?  

The one tube is a 32 and in this set its a Wards Airline 32 though that doesn't mean its a Wards Airline set.  The socket is engraved with 32 as well, so that's the right tube for the set.   One knob flips the back end of the two coils to align the coils, one turns what looks like a rheostat and the center knob turns the tuning cap.  On the back of the chassis is a two prong jack for "phone". Not much else to it.  The front has an Indian and a Covered Wagon design.

Thanks for the help!!!  Icon_thumbup

[Image: https://www.dropbox.com/s/rpmikemhihm32a....jpg?raw=1]

[Image: https://www.dropbox.com/s/cn1q3hp6s0qpp1....jpg?raw=1]

[Image: https://www.dropbox.com/s/gt651iuktmn7vw....jpg?raw=1]

[Image: https://www.dropbox.com/s/7rmcy4d7mo6tw0....jpg?raw=1]

[Image: https://www.dropbox.com/s/tcysa07yxkzaam....jpg?raw=1]

[Image: https://www.dropbox.com/s/zwgmufskldxsbw....jpg?raw=1]
#2

Wow, that's about as bare bones as you can get.

Greg

"We are here to laugh at the odds and live our lives so well that Death will tremble to take us."
#3

Certainly unique looks like a WPA project?!

Paul

Tubetalk1
#4

Very kwel!!! I would guess that it was a kit of some sort. It is regenerative, the knob one the left control the regeneration, center knob is the tuning and the the knob on the right adjust the filament voltage.
Not sure about the filament wiring as the pic doesn't show it well.


Attached Files Image(s)
   

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#5

Was hoping you would comment Terry. I will take a closer look at wiring next trip to the museum but I think you have it pretty close!
#6

Obtw I forgot the ant wire, it's the long white that is going diagonally across the bottom of the chassis.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#7

At least it won't take long to recap!  Icon_lol

Ron

Bendix 0626.      RCA 8BX5.   RCA T64
Philco 41-250.    Philco49-500
GE 201.             Philco 39-25
Motorola 61X13. Philco 46-42        Crosley 52TQ
Philco 37-116.    Philco 70
AK 35                Philco 46-350
Philco 620B.       Zenith Transoceanic B-600
Philco 60B.         Majestic 50
Philco 52-944.    AK 84
#8

At first glace I thought that it may have been a short wave convertor of some sort, but since it is obviously battery operated, and has no provision for connecting it into the front end of another set, it must be a regenerative receiver, or perhaps a tuned RF amp of some kind.
Regards
Arran
#9

Methinks the connector on the back that sez phone is the give away. If time was no object you could have a look at some magazines from that time period (1931-34) something like Shortwave Craft or Radio News. You maybe able to find an ad or short article on it. Unfortunately it's a very common circuit from back in those days.
The cabinet looks to be home made or something that was repurposed (to use a modern term)

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#10

I've found some ads in old Popular Mechanics that discuss one-tubers like this one. Nothing with the Indian motif, though. I wonder if this was intended for a Boy Scout cabin or something similar.

Greg

"We are here to laugh at the odds and live our lives so well that Death will tremble to take us."
#11

You got the circuit ID'd Terry and if it is one of those kit jobs from back then it could easily have been some small outfit that didn't last too long or as Arran suggests the cabinet may be a home made job. Wallace, thx for looking in the old mags!!
#12

That's a fantastic art deco cabinet! The whole "opening of the Western frontier" theme that was so common in the early '30s. The native guide, the big farmhouse, the airplane at the top, all surrounded by the rays of the rising sun... I would certainly love to have something like that in my collection!

The cabinet doesn't seem homemade to me. Too detailed.
#13

That thing gave me the willies!!!!!   Icon_eek




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
An attempt to remove the Field Coil from a G speaker
Q8. What's the meaning of life? I have read that someone made a spider out of the clear plastic from bubble packagin...RodB — 11:07 AM
An attempt to remove the Field Coil from a G speaker
So, Q1. Does anyone know where to get the spider. Q2. If there is no such place, what material is best? I doubt tin is...morzh — 09:43 PM
An attempt to remove the Field Coil from a G speaker
Arran The oxidation seems to go deep, a few layers. The break starts right there, but then it will occur on every la...morzh — 07:35 PM
An attempt to remove the Field Coil from a G speaker
Mike, This is just a thought, the are on the coil where the verdigris (green oxidation is) I wonder if that is where ...Arran — 06:32 PM
An attempt to remove the Field Coil from a G speaker
Mike; I've made a one or two spiders by using some card stock, and a razor blade, it took more then one try but they ...Arran — 05:48 PM
Philco 91 Restore Code ??
I wondered about that. Wish there was some place local to get this stuff.dconant — 04:20 PM
Philco 89 indicator light.
Bending the lamp bracket (moving the lamp, that is) can possibly change the shape of the pointer a bit, but not its loca...morzh — 04:01 PM
Philco 91 Restore Code ??
Because the usable power rating of it then is (3,200/20,000)*25W= 4W. Maybe a tad more due to the mass, but not much. Yo...morzh — 03:59 PM
Philco 89 indicator light.
Thank you Dan, that was the trick. I kept trying to rebend the lamp bracket but that wasn't doing anything to help.Jim Dutridge — 02:18 PM
Philco 91 Restore Code ??
20K 25 watt. I thought it was a 20 watt at first.dconant — 01:37 PM

[-]
Who's Online
There are currently 4785 online users. [Complete List]
» 2 Member(s) | 4783 Guest(s)
AvatarAvatar

>