Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco rotor?
#1

What is the world is this and what was it used for??
http://www.ebay.com/itm/Early-PHILCO-ROT...SwIdpZxBln
#2

To rotate antennae?

This one though is the controller, I think. The actual rotator has a motor (selsyn) to rotate the antenna.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

+1
Pretty much worthless.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#4

yes, we did not have one of those but I remember folks who did (or one like it). The antenna on the roof or chimney could be rotated to get better reception depending on what TV channel you wanted to watch. The controller dial was rotated to align the antenna with the compass direction noted on the dial.
#5

Yes, I used to have one of those, not philco but another brand. That's the control to rotate the antenna. There is also a motor on the roof hooked to the antenna.
#6

help my father install,,,many of them,,,,they work GGreat
#7

Hello Friends

Yes , you are right . It' s a controller to make a motor rotate the antenna on the mast  

I used a french one in the 70 ' s when I played DXTV in my appartment , located in the surroundings of Paris .

With a big antenna , I used to catch Bruxxelles , Luxembourg from a distance of about 300 Km;and many other emitters from East of Europe , Russia , Scandinavia . Germany .


I wish you a nice week end

cordially

Claude

http://www.ebay.fr/itm/like/182776757022...dispItem=1

https://www.google.fr/search?q=rotor+d%2...-cL0F1lpgM:
#8

How far is 300 Km?
#9

Divide by 1.61 to get miles

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#10

186.3 miles. Now it's clear.
Thanks
#11

Hello

I thought that since some years , americans had moved to the metric system ??? am I right ???
#12

nope, not metric.
#13

ON ALL American Cars,,,they have Metric Bolts ----ONLY--- NOTHING else in this Country,,,,THAT,,,,I know of-----SORRY to disappoint YOU-----CHEERS
#14

HAHA, yes, that is true.
#15

There was a plan in the 1970s to move the USA to the metric system, like the rest of the world. It got cancelled in the '80s, so we still use miles, gallons, pounds, drams, gills, grains, bushels, knots, pecks, and other useful units of measure.

A few metric items survived, though. Your 5 grain aspirin tablet is now 325 mg, and you 4/5 quart whiskey bottle is 750 ml.

John Honeycutt




Users browsing this thread: 5 Guest(s)
[-]
Recent Posts
Made mistake & did not label connection
You haven't given us the model number of the set so I looked up the 6A8 pin assignment. Pin 8 is the cathode and pin 7 i...RodB — 01:19 PM
Made mistake & did not label connection
Happy Thanksgiving all! I have made a real bonehead mistake this time. Hope someone can help.  I am trying to determi...georgetownjohn — 12:51 PM
New Philco Repair Bench
Apparently there is a new Philco Repair Bench found at https://philcoradio.com/repairbench/ When I try to go to order a ...dconant — 12:00 PM
Philco 60 Squealing
Well, a wave trap is a trimmer in series with the coil so at the resonant frequency it provides a short to ground. This ...RodB — 10:07 AM
Philco 60 Squealing
Rod, My radio is run 7. The wave trap is on that schematic as shown in the picture. dconant — 09:21 AM
American Bosch Model 802 auto radio
Hi Arran ,  Thanks for your help with this radio.And especial thanks for letting me know to look it up under United Ame...Antipodal — 04:32 AM
Philco 60 Squealing
Usually a wave trap is for keeping IF signals from entering the antenna and from leaving the antenna. You feed an IF sig...RodB — 09:30 PM
Philco 60 Squealing
I just peaked it for the best signal at 600. NULL it for IF frequency, originally it would have been null for 500kh...Chas — 08:05 PM
Philco 60 Squealing
Wavetrap no longer matters.morzh — 05:19 PM
Philco 60 Squealing
Rod, I had checked out your suggestions but did not help. I did solder the ground rivets to the chassis as Chas suggeste...dconant — 04:52 PM

[-]
Who's Online
There are currently 4317 online users. [Complete List]
» 2 Member(s) | 4315 Guest(s)
AvatarAvatar

>