Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

GE Model 200
#1

Working on a GE Model 200.. Question

How do you get the glass out without breaking??

See pictures..

[Image: https://farm5.staticflickr.com/4447/3674...2236_b.jpg]

[Image: https://farm5.staticflickr.com/4484/3741...fa6c_b.jpg]

Thanks

Skip...
#2

I believe,, they are clips-- that flip open---out-----BUT could be __WRONG,,,,and they JUST ,,lift a little to get glass out??????//// they also look like fansworth clips,,,with a little wedge in them ,,to hold that main part tight,,and down ,or against the glass,,,,,Can't really tell from this point of vision,,,----hope that may HELP-----CHEERS
#3

Yes.. Was able to get glass out . One clip broke on right side and was able to slide glass from other two..

Thanks All

Skip...




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4046 online users. [Complete List]
» 3 Member(s) | 4043 Guest(s)
AvatarAvatarAvatar

>