Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Way to Save $$ on Mohawk Toner Lacquer
#1

I use a ton of Mohawk and, depending on where you are, found a much less expensive source than buying online.

If you go to Mohawk's site and check the "Find a Distributor" link, you can search for a distributor that's local to you. I'm in Atlanta and found a few. Turns out they sell the toner lacquer for a couple bucks less per can than online, with a greater selection and no shipping costs.

Here's the link: http://www.mohawk-finishing.com/dist_lookup.asp

If you don't find one in their list, call a local paint distributor/wholesaler and see if they carry. (not a retail paint store).

Hope that helps,

Joe

P.S. I'm not associated with Mohawk in any way, I have just found their product to be superior to work with for hand-rubbed cabinet finishes.

"Ignorance is bliss...'til you have to fix a radio..."
#2

Thank you for sharing this information, Joe.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
42-345, question for an owner
+1 for number 4 with an added theorem: The more connections in a circuit the higher the possibility of failure.RodB — 12:17 PM
Help with Readrite 410 tube tester
IMHO, Between the transformer common (where you have one lead) and any point on the rotary switch, you should be reading...MrFixr55 — 11:53 AM
Help with Readrite 410 tube tester
This is such a simple looking schematic yet its throwing me off and driving my Fluke DMM crazy. I cant get real voltage ...daveone23 — 11:23 AM
42-345, question for an owner
Rod :lol: 1. The schematic always work according to the wiring. 2. If the schematic does not work according to the wir...morzh — 10:36 AM
42-345, question for an owner
Wow Mike, that's profound! That should be the Phorum motto.RodB — 09:49 AM
Philco 269 - 444 FIVE VALVE VERSION?
Hi Chas, I hear you. If you happen to be passing NYC vs Philly, I can give it a good home also. @ RadioRoslyn, T...MrFixr55 — 09:25 AM
Bakelite crack repair - what is best epoxy?
I'm with Arran, but I use even stronger epoxy with a 72 hour cure. It is sold to knife makers for bonding wooden handles...DaleHCook — 08:47 AM
42-345, question for an owner
It cannot be wired correctly and work incorrectly. It is as simple as this: if you want to have you treble up and bas...morzh — 08:33 AM
42-345, question for an owner
Welcome to the Phorum, Noel! I don't have that radio, but I'm sure others will jump in with help. Take care and BE HEA...GarySP — 07:52 AM
42-345, question for an owner
Hello,      I am working on a Philco 42-345.  It appears that there have been many hands inside this radio before me....UpNorth — 07:42 AM

[-]
Who's Online
There are currently 3130 online users. [Complete List]
» 1 Member(s) | 3129 Guest(s)
Avatar

>