Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

What Philco? Franken?
#1

Is this a real Philco or a Phranken Transitone?

No other pics yet. he said the chassis looks like a PT-25 

Icon_smile


Attached Files Image(s)
   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#2

You gotta quit hanging around over there [Image: http://philcoradio.com/phorum/images/smi..._smile.gif]
Best guess is that it's a CA model or a homemade cab.
As for the model it doesn't matter much all of those
Transitones are pretty much the same, exception
being the Philco /Simplex model(s).

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

...actually many of the Simplex/Philco Transitones are the same.

That is not a factory Philco cabinet. Simplex? No idea but I doubt it.

Could be a third party cabinet, or even an exceptionally well done homemade cabinet. Maybe this was originally in a Bakelite cabinet and the original owner broke the original cabinet and did this (or had it done)?

--
Ron Ramirez
Ferdinand IN
#4

It resembled the late 30's philco grills so I thought there might be a chance at it being correct.

Icon_lol
It is my other past time Terry

Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#5

The Simplex I was thinking of is a trf set.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#6

Poor cabinet.  Doesn't look anything like Al Franken.  You should be ashamed!   Icon_mrgreen  Really, the cabinet is reminiscent of a Sparton.  Joe

Joe

Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
#7

Are there any pictures of the back? I thought that I might ask as there are some Canadian Philcos that have different cabinets from the U.S models. The only other thing I can think of is that it might be a cabinet for a Motorola or some other brand that has a similar knob and dial layout.
Regards
Arran
#8

The dial and knob spacing looks like the chassis could be a 39-652, PT-33, PT-25, PT-61, or a PT-39.  The cabinet could be as Arran says, a Canadian version...?

Joe

Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
#9

I don't have any other pics sorry..

Icon_smile

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM

[-]
Who's Online
There are currently 1403 online users. [Complete List]
» 1 Member(s) | 1402 Guest(s)
Avatar

>