Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

42-380 Restoration Started
#1

Here is the cabinet of a 42-380 I'd like to redo.
It's seems solid enough but the finish is hazing on the sides and the veneer is peeling off the top. I might have it professionally done but I'd appreciate any advice before I get started.
[attachment=1]
[attachment=0]
#2

VENEER IS ALMOST IMPOSSIBLE TO FIX .I WOULD HAVE A PRO TACKLE THIS ONE . Cost a little but you will get a nice job .
I love theses big consoles if i had room i would buy ever one i came across . Icon_biggrin
Denver.
#3

here is a site that will help you http://www.antiqueradio.org Icon_biggrin
Denver.
#4

Thanks for the advice. By chance any idea of a fair ballpark number. I haven't had any experience getting these redone but I would imagine I'm looking at two or three hundred.
#5

At the least . Lot of money but i think these old sets are worth it . Icon_biggrin
#6

Quotes are in:
Cost to repair veneer: $150 to $180.
Cost of complete refinish (not including photofinish repair) $300 to $460.

I'm thinking how hard can the veneer be to repair or replace...
If anyone has tackled re-veneering and has anything they want to share, I'm all ears.
Thanks,
#7

Thanks to encouragement and inspiration Steve DeClario, I'm going to attempt to reveneer, and refinish.
Steve said the top would come off and what-do-you know, it does.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>