Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Meissner
#1

I'm working on posting pics and a video of the 4 Meissners that I have been lucky enough to accumulate:

https://www.russoldradios.com/blog

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#2

updated

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#3

Russ;
  I have a Meissner, but it isn't a high end tuner, it's a radio-phonograph-cutter portable. Meissner obviously made the radio chassis and coils, but I think the record player/cutter was made by General Industries. I would like to find a diagram of the cutter as I'm not sure if there are pieces missing.
Regards
Arran
#4

Those Meissners were made by Thordarson-Meissner not too far from here, in Mt. Carmel, Illinois.

Thordarson is still in business but they have moved their headquarters to North Las Vegas, Nevada.

--
Ron Ramirez
Ferdinand IN
#5

I also have a Signal - Shifter EX and a couple of smaller Meissners. I noted that the power trans on one said Meissner - Thordarson, or in reverse.

Meissner is not listed in the Nostalgia Air/Riders database BUT they are in vols. 18 and 19.

And here is some kit info.

http://plymouthcolony.net/starcity/radio...l#meissner

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#6

Russ, Ron;
  I noticed that Meissner used to post a lot of ads in many magazines during the post war period promoting the use of their chassis as replacements in the cabinets of older radios. I don't think that Meissner ever manufactured and marketed complete factory produced units with cabinet the way E.H Scott or Midwest did, I think they only produced and sold chassis with ancillary items like speakers. If they did produce complete sets, such as radio-phono combo units they would probably be very rare. Come to think of it I don't think I have ever seen one of their chassis retrofited into a pre war radio cabinet, in spite of the magazine ads, I did see one that was fitted into a home made cabinet, basically in a box playing the role of a component tuner amplifier, though I am sure that it happened.
Regards
Arran
#7

You might be right, or at least I thought so prior to seeing some of those ads that seem to show radios with cabinets. I need to do some more research.

This actually comes to the heart of my decision to restore these radios. Like a Scott or McMurdo Silver, it is acceptable to display one of these radios in almost any cabinet - or without one - or with one that displays the radio chassis (Clifton) and consider them to be as sold. And since I have no cabinets, figuring out a Clifton-like display would be my next consideration.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#8

There are pictures of the 2961 cabinet in Rider's 19.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
38-10T chassis Restoration begins
Thanks for the info guys. I always wondered why the use of mica. Now I know.dconant — 01:52 PM
38-10T chassis Restoration begins
Most common plastics have a dielectric constant in the 3-4 range whereas mica is around 6. This means that even if you w...Steve D — 01:46 PM
38-10T chassis Restoration begins
It is acceptable but not desirable. Plastic is not an approved cap dielectric, and even though a reasonably thick piece...morzh — 11:52 AM
38-10T chassis Restoration begins
I have a question about the mica sheets. I thought I saw somewhere on the Phorum where someone used thin plastic report ...dconant — 10:44 AM
38-10T chassis Restoration begins
Yes, you should carefully remove the mica sheets from the trimmers otherwise you risk trapping foreign material in the t...RodB — 10:34 AM
American Bosch Model 802 auto radio
Hi Joe, Thank you again. The American Bosch Model 634A has the same tube lineup as my Model 802 and the parts layout dia...Antipodal — 03:09 AM
38-10T chassis Restoration begins
hello everyone, I know it has been a while since I have posted about this radio but finally got chance work on it . I ...radiorich — 02:45 AM
Rusty Tuning Condenser
You could soak the fins in vinegar. You have to be careful if any pot metal is involved because the vinegar will dissolv...RodB — 09:20 PM
Rusty Tuning Condenser
Hello, I have a Philco 91 where the tuning condenser fins are rusty. I magnet sticks to them so they can't be aluminium....dconant — 05:50 PM
American Bosch Model 802 auto radio
I’ve found six United Bosch auto radio’s with the same 6-tube line-up as the 802, on NostalgiaAir. They are models 150, ...Joe Rossi — 02:52 PM

[-]
Who's Online
There are currently 3266 online users. [Complete List]
» 2 Member(s) | 3264 Guest(s)
AvatarAvatar

>