Freshman Masterpiece Instructions
Posts: 27
Threads: 6
Joined: Feb 2017
City: Coatesville PA
Does anyone know where I might find a reproduction Freshman Masterpiece instruction "label" for the rear of my set? Here is a shot of what the original looks like.
***********
Dave Thomas
Coatesville, PA
Posts: 4,655
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
That looks like it's for the first year model Freshman Masterpiece, 1924, the one with the safe knobs. I have a 1925 model Masterpiece but it doesn't have that instruction card, and there is no evidence that it ever did.
Regards
Arran
Posts: 3,131
Threads: 56
Joined: Apr 2011
City: Lexington, KY
Sorry Dave, my quick search did not turn up any reproduction labels, but I found a couple of pretty decent pictures of them:
https://www.flickr.com/photos/aa9uc/1597...otostream/
https://www.flickr.com/photos/35799859@N...470518392/
If you're patient you might be able to recreate one using a graphics program.
I was able to crop and straighten the first image so maybe a copy store like Kinko's or Office Max can print it out on card stock for you. PM me your e-mail address and I'll send it to you.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 15,510
Threads: 544
Joined: Oct 2011
City: Jackson, NJ
I also thought of Photoshop - the label is tarnished but is intact, so some advanced graphics software could make a good copy of it.
Scan it with the highest resolution possible as soon as you can before it deteriorates.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 27
Threads: 6
Joined: Feb 2017
City: Coatesville PA
Thanks everyone for the recommendations. I'll PM John for the photos and brush up on my Photoshop skills.
***********
Dave Thomas
Coatesville, PA
Posts: 27
Threads: 6
Joined: Feb 2017
City: Coatesville PA
Well, it took a while but thanks to John (and Photoshop) I was able to clean up the image he sent me and still keep the "antique" look. I had the local UPS store print the final version on heavier card stock and then I laminated it to poster board using 3M spray photo mount. I even Photo-shopped in the original serial number. Below are some shots of the results. If anyone needs a copy for their Freshman just let me know and I'll send it along.
***********
Dave Thomas
Coatesville, PA
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
It would be nice to have a file/page here to keep JPGs of these printable forms. Members only -
I suppose I could put them on my site but people would not know where to look for them.
Russ
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
(This post was last modified: 04-28-2018, 05:30 PM by Phlogiston.)
Posts: 3,131
Threads: 56
Joined: Apr 2011
City: Lexington, KY
Good job Dave, your Freshman looks great!
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 5,071
Threads: 269
Joined: Nov 2012
City: Bandon
State, Province, Country: OR
Russ, great suggestion, thanks! The moderators talked it over with Ron and the "downloads" section has now been changed to include other brand radio downloads as well. The downloads section is a "members only" portion of the phorum. It now reads "Philco (and more) Downloadable File".
Posts: 1
Threads: 0
Joined: Feb 2018
City: Bismarck, ND
Hi Dave,
I am restoring an identical Freshman Masterpiece to yours and have been searching for a reproduction of this label for some time. What can I do to acquire a copy from you?
Thanks for any help
Henry
Posts: 27
Threads: 6
Joined: Feb 2017
City: Coatesville PA
Henry, I sent you a PM with a link for the jpg that I photo-shopped since the file is too big for the downloads section. Let me know if this is will work for you.
***********
Dave Thomas
Coatesville, PA
Posts: 214
Threads: 16
Joined: May 2010
City: Kokomo, IN
i like to have copy of that file to make one for masterpiece radio thanks
Posts: 4
Threads: 1
Joined: Feb 2023
City: Berthoud
State, Province, Country: Colorado
Dave, I know its been a while since your post, but I'd like to have a copy of this if possible.
Thanks
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
berthoudbill - Be aware that this is an old thread, and the OP (Dave) has not visited here in nearly three years.
--
Ron Ramirez
Ferdinand IN
Posts: 3,131
Threads: 56
Joined: Apr 2011
City: Lexington, KY
I emailed Dave and he sent me a link to download the files. Here is his reply:
Quote: Hi John,
Here is a link to my OneDrive since the files are quite large. One of the files is a photo of my finished radio with the instruction label attached. I used the Masterpiece-2 but I also included the -3 label which I thought was a little too yellow. The label is from an actual Freshman Masterpiece so that's why it has radio call signs and some borders that look offset. The files should print full size just like the original. The serial number is from my set but if you have Photoshop, you can change it easily or I could do it for you if you like the label. Let me know if you have any problems downloading the files. The link is good until 10/28.
Thanks!
Dave
Below is the link to his onedrive active until 10-28:
https://onedrive.live.com/?authkey=%21AE...91D872F145
Maybe a Moderator could also download them to our library?
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Bakelite crack repair - what is best epoxy?
|
Thanks everyone. I appreciate you sharing your experience and looks like I'll work with the 24 hr two part clear epoxy....de371 — 10:25 PM |
Jackson 665 j2 schematic request
|
Without a schematic its going to be hard tracing the wire wound spool resistors.daveone23 — 05:21 PM |
Jackson 665 j2 schematic request
|
Looking for a schematic for the 665 j2 multimeter.daveone23 — 04:42 PM |
Looking for place to donate unique Philco Philco J-1930 Prototype
|
>>I'll write to the Henry Ford.
I heard, his secretary answers his mail, not he himself.morzh — 12:15 PM |
Philco 48-200 alignment questions
|
Just checked the power cord and I did in fact wire it so the hot side (small prong) goes to the switch.transitony — 11:52 AM |
Looking for place to donate unique Philco Philco J-1930 Prototype
|
Thanks for the suggestions. I'll write to the Henry Ford. That would certainly make sense since by the time this prod...jeibner — 11:49 AM |
Looking for place to donate unique Philco Philco J-1930 Prototype
|
For what it's worth, the Henry Ford Museum and Greenfield Village in Dearborn, Michigan may be an option.
The obvious ...GarySP — 11:39 AM |
Help with Readrite 410 tube tester
|
Mike and I just had a short discussion yesterday about this very subject. So often it's the connections. Ya gotta have t...RodB — 10:08 AM |
Looking for place to donate unique Philco Philco J-1930 Prototype
|
We have a regional museum here in the Twin Cities called The Pavek Museum. They have an extensive collection of communic...RodB — 09:30 AM |
Philco 89B code 123 newbie
|
I did some nosing around and found that the original caps were 4 3/4" long x 1 5/16" in dia. Guess what 1"...Radioroslyn — 09:28 AM |
Who's Online
|
There are currently no members online. |
|
|