Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Green speaker cloth model 45
#1

So another acquisition  a model 45 and (yes I probably paid too much) but no others have shown up at the right time.
I herd someone here talking about the speaker cloth on a 45 being green. This one has olive green kinda shinny cloth around the edges. Looks like it was pretty nice when it was new.
I adjusted the color to make as true as  as possible on my monitor. Has anybody seen this cloth for sale anywhere?


Attached Files Image(s)
   

!!!!!!!!!!!!!!!!!!!RESISTANCE IS FUTILE!!!!!!!!!!!!!!!!!!!!!!  
                           /\/\/\/\/\/\/\/\/\
                                                     
                                 [Image: http://philcoradio.com/phorum/images/smi...on_eek.gif]  Chris
#2

Green? Maybe the cloth has changed color over the decades? Most cloths I've seen are gold. If it's metallic thread woven in there, it could conceivably tarnish and look green. I used cloth pattern #14 from Radio Daze as a replacement. Not a perfect match, but it does have a gold color to it. If you look at the 45C in the Philco Gallery, look for the one submitted by me. That will give you an idea how it looks.

http://philcoradio.com/gallery2/1935a/#Model_45C

http://www.radiodaze.com/grille-cloth-14-item-grc14/

You might also consider the Goldenrod cloth available through Richmond Designs.

http://www.richmonddesignsinc.com/grille...e#Previous

Regards,

Jeff Wiles
#3

I think the olive green is correct. It looks preserved around the edges. This cabinet design was to look like a butterfly. I think they wanted it to have color. Notice the horizontal lines are light colored maybe white. Most philcos had very dark lines like these.

!!!!!!!!!!!!!!!!!!!RESISTANCE IS FUTILE!!!!!!!!!!!!!!!!!!!!!!  
                           /\/\/\/\/\/\/\/\/\
                                                     
                                 [Image: http://philcoradio.com/phorum/images/smi...on_eek.gif]  Chris
#4

I have seen the 45 with both green and gold grille cloth. I agree that the green would be original.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Mission Bell Model 19A Car Radio
Hello everyone,  As mentioned in my last post I was going to see if the vibrator / rectifier section could be persuaded...Antipodal — 08:21 PM
Philco 60 Squealing
Wondering if I did it backwards. If a coil was wound backwards, the oscillator would not work at all. Old school...Chas — 07:23 PM
Philco 38-7 Speaker
4-ohm speaker. Black, Green leads.tludka — 07:00 PM
Philco 42-390, code 121 speaker
#87 on the schematic.  This radio had a 8" Zenith  speaker attached to it when I got it. I do don't know the hist...Stevelog — 06:39 PM
Philco 60 Squealing
I'm pretty sure I now have the litz wire soldered. This did not make any difference. Back in April I rewound the seconda...dconant — 06:25 PM
Philco 38-7 Speaker
Just to make sure, you chose either 4 ohm into 5K or into 10K? (blk-org or blk-grn)morzh — 06:23 PM
Philco 38-7 Speaker
I have let this one sit because of other duties. Now I am back, and I have a couple of questions. I hooked up a Hammond ...tludka — 05:34 PM
Philco 42-390, code 121 speaker
>>A closer examination of the very small print schematic indicates that the speaker is a PM type. This shows a ...morzh — 05:18 PM
Philco 60 Squealing
Litz is typically tinned by simply rubbing it with the soldering iron tip while immersed in solder (and a bit of rosin f...morzh — 05:14 PM
Philco 6K7
The suppressor grid (if by G3 you mean the S) is usually at the Cathode potential, which in this caes is GND. I am not ...morzh — 05:10 PM

[-]
Who's Online
There are currently 4781 online users. [Complete List]
» 1 Member(s) | 4780 Guest(s)
Avatar

>