Two Philcos followed me home
Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
I was over at a good friend's house and saw this old philco table radio sitting in his basement. I asked him about and he said it was free for the taking and there was a second one upstairs. The first one is a 41-255 that was sitting up on end and sustained some water damage. I think it can fix but the veneer has come off and the wood under it is warped. It's a shame as the rest is almost perfect. The other one is a 40-150. It's in good shape but needs a good cleaning a going over.
[Image: http://farm2.staticflickr.com/1295/46801...d59a_b.jpg]
Philco 41-255 by TBS-50, on Flickr
[Image: http://farm5.staticflickr.com/4057/46807...b213_b.jpg]
Philco 40-150 by TBS-50, on Flickr
Some pic are here: http://www.flickr.com/photos/42774321@N08/4680734522/
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 217
Threads: 40
Joined: Dec 2009
Hey Terry . Nice find . I started to get a 40-150 but was afraid of all the buttons . Ipicked up a 37-93 nice set body looks great . But going to have to overhaul the whole chassi.
Kent.
Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Hi Kent
The buttons arn't any thing to be scares of. Actually I think my friend replace all the button on the '150 They look new. As It goes I think I like the '255 a bit better it has a more complete coverage of the SW bands.
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Great acquisitions, Terry - but good luck with that cabinet side on that 41-255! 
Wow, it looks like the side of that 41-255 has been sitting under water for a decade or so.
The 40-150 should be an easy restore, other than the usual rubber-covered wiring. Kent, as Terry said, don't let those pushbuttons intimidate you. Pushbuttons are your friends.  It is nice to set up certain favorite AM stations and them just push a button and there is a favorite.
The 41-255 will be much more difficult to restore, and not just because of the cabinet problems with yours. The chassis is a real pain. Rubber-covered wiring galore, especially around the band switch which has three sections. Ugh. 
--
Ron Ramirez
Ferdinand IN
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Yep, I got a 41-255 just over (2) years ago for $25 at, believe it or not, an antique store. Talked down from $35. It's in pretty good shape. I love this Philco!  Got the schematic and service info from Chuck Schwark, also same for a 42-1008, for a very good price.
Best regards,
Mike
Posts: 461
Threads: 31
Joined: Sep 2009
City: Lapeer
State, Province, Country: MI
I am envious!!!
Joe
Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Oh, hello Joe, how the heck are ya? Sometimes I get lucky and find some good stuff, but I've just re-entered the hobby in the last couple years. I wonder what I might have if I hadn't taken a 30-odd year hiatus from collecting. Well, never too late to begin afresh. There have been a couple '255's on ebay recently. Joe, if you're looking for something in particular and I happen to find it in my neck of the woods I'd be happy to let you know about it. Anything to help out.
Best Regards,
Mike
Posts: 404
Threads: 53
Joined: Feb 2009
Mikhail7 Wrote:Oh, hello Joe, how the heck are ya? Sometimes I get lucky and find some good stuff, but I've just re-entered the hobby in the last couple years. I wonder what I might have if I hadn't taken a 30-odd year hiatus from collecting. Well, never too late to begin afresh. There have been a couple '255's on ebay recently. Joe, if you're looking for something in particular and I happen to find it in my neck of the woods I'd be happy to let you know about it. Anything to help out.
Best Regards,
Mike Mike, how do you take a 30 year break from collecting when you're only 28...?  Do you have any remnants from your collecting past?
tractorforum.com *** I reserve the right to be wrong
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Am I only 28? Feels like it sometimes. Hello Music, I have an Army Signal Corps BC-348 I got from Fair Radio Sales in November 1974, an RME 45 from an old retired gent I knew back in the 70's who used to build and inspect amplifiers for AMI Jukebox Co. here in Grand Rapids, a hulking 80+ lb. Navy CFT 46245 receiver from the same gent, and a Philco 38-93 I got at a garage sale. I used to have a G.E. J-64, a Firestone S-7403-9 or some similar model #, a cabinetless 1936 RCA 6K2 and a Philco 42-345 I replaced an electrolytic to bring back to life in about 1971. I think I had a couple RAX and/or RAK receivers, an MN 26 "Y", and an RCA 9K3. Oh, and a Hallicrafters 5R10A, and a Silvertone. Dunno what happened, traded,taken without permission, stolen by Barnabas Collins in that parallel time lunacy they had going.....  Had fun with them tho. Sold a Magnavox Regency Symphony in about '72 I've been tolchocking myself over ever since. 
Posts: 404
Threads: 53
Joined: Feb 2009
Sounds like you got it covered!
tractorforum.com *** I reserve the right to be wrong
Posts: 461
Threads: 31
Joined: Sep 2009
City: Lapeer
State, Province, Country: MI
Mikhail7 Wrote:Oh, hello Joe, how the heck are ya? Sometimes I get lucky and find some good stuff, but I've just re-entered the hobby in the last couple years. I wonder what I might have if I hadn't taken a 30-odd year hiatus from collecting. Well, never too late to begin afresh. There have been a couple '255's on ebay recently. Joe, if you're looking for something in particular and I happen to find it in my neck of the woods I'd be happy to let you know about it. Anything to help out.
Best Regards,
Mike
Much appreciated Mike. Have a blessed holiday!
Joe
Joe
Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
You to Joe, and everyone. have a safe enjoyable holiday weekend.
Posts: 271
Threads: 12
Joined: Nov 2005
City: Nashville, TN
Hi guys,
Terry, nice find on the 2 Philcos. The bad side may have some hope left in it.
It appears that only the top layer of veneer has seperated, (good) and all in one piece.
The base for the veneer only looks like it's cracked, and that can be filled.
By keeping the veneer intact, but removing it, you can repair the base, strip the veneer of old finiah, carefully fit and glue the whole piece back on. Make usre you use a lot of even pressure. Good clamps, with a flat board inbetween to help spread out the pressure.
After the piece is all dry and solid, you can then lightly sand, then refinsh as you wish.
By the way, I noticed in your photos the Truetone end table radio with flip out front. I bought two of those last year, waiting to redo them. I had bought that dial glass one night by itself. Then two weeks later the radios came up with one glass missing. At least it is back where it belongs now. I like the way the glass sticks out in front by itself.
Good luck with your sets.
Gary.
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Mission Bell Model 19A Car Radio
|
| Hello everyone,
As mentioned in my last post I was going to see if the vibrator / rectifier section could be persuaded...Antipodal — 08:21 PM |
|
Philco 60 Squealing
|
|
Wondering if I did it backwards.
If a coil was wound backwards, the oscillator would not work at all.
Old school...Chas — 07:23 PM |
|
Philco 38-7 Speaker
|
| 4-ohm speaker. Black, Green leads.tludka — 07:00 PM |
|
Philco 42-390, code 121 speaker
|
| #87 on the schematic.
This radio had a 8" Zenith speaker attached to it when I got it. I do don't know the hist...Stevelog — 06:39 PM |
|
Philco 60 Squealing
|
| I'm pretty sure I now have the litz wire soldered. This did not make any difference. Back in April I rewound the seconda...dconant — 06:25 PM |
|
Philco 38-7 Speaker
|
| Just to make sure, you chose either 4 ohm into 5K or into 10K? (blk-org or blk-grn)morzh — 06:23 PM |
|
Philco 38-7 Speaker
|
| I have let this one sit because of other duties. Now I am back, and I have a couple of questions. I hooked up a Hammond ...tludka — 05:34 PM |
|
Philco 42-390, code 121 speaker
|
| >>A closer examination of the very small print schematic indicates that the speaker is a PM type.
This shows a ...morzh — 05:18 PM |
|
Philco 60 Squealing
|
| Litz is typically tinned by simply rubbing it with the soldering iron tip while immersed in solder (and a bit of rosin f...morzh — 05:14 PM |
|
Philco 6K7
|
| The suppressor grid (if by G3 you mean the S) is usually at the Cathode potential, which in this caes is GND.
I am not ...morzh — 05:10 PM |
|
Who's Online
|
There are currently 4789 online users. [Complete List]
» 1 Member(s) | 4788 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
