Posts: 797
Threads: 42
Joined: Dec 2008
City: Chicago, IL
This is hands down the nastiest TV I've encountered, but it was local and the price was right. I wonder how many packs of smokes it took to build up that coating ? On the bright side it seems to have preserved it well. It's a really shame about the two cracks on the safety plastic screen.
[Image: https://farm1.staticflickr.com/925/43030...1b63_c.jpg]
[Image: https://farm2.staticflickr.com/1790/4299...a2ea_c.jpg]
GoJo is doing a better job that the glass cleaner.
[Image: https://farm1.staticflickr.com/918/42996...3a9e_c.jpg]
[Image: https://farm2.staticflickr.com/1828/4299...538b_c.jpg]
Steadily making progress
[Image: https://farm1.staticflickr.com/847/42996...02d3_c.jpg]
(This post was last modified: 06-27-2018, 05:48 PM by Bob Andersen.)
Posts: 204
Threads: 5
Joined: Sep 2005
City: Newark, Ohio
You have to remember that when that Philco was made, the dangers of cigarettes weren't known.... so everyone smoked.
Posts: 7,249
Threads: 267
Joined: Dec 2009
City: Roslyn Pa
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 204
Threads: 5
Joined: Sep 2005
City: Newark, Ohio
Posts: 797
Threads: 42
Joined: Dec 2008
City: Chicago, IL
Sure, both my parents were chain smokers. I've see a lot fs sets from back then though and nothing this bad. At least it's coming off and revealing a pretty nice cabinet.
[Image: https://farm2.staticflickr.com/1763/4302...8091_c.jpg]
[Image: https://farm1.staticflickr.com/916/42355...5e83_c.jpg]
The original 17DRP4 CRT has been replaced with a 17BZP4 and it tests very good.
[Image: https://farm1.staticflickr.com/924/42355...ac1e_c.jpg]
Posts: 667
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
dollar store sells ,,some stuff,,,,called Alsome,,,for a dollar ,,,,and I mean Alsome job it does,,
Posts: 481
Threads: 18
Joined: Jan 2013
City: Mesa, AZ
I can't believe how cruddy that picture tube cover was. It looked like the brown color was the original finish and was coming off
Posts: 797
Threads: 42
Joined: Dec 2008
City: Chicago, IL
Alsome looks like a good product. I'll give it a try
Posts: 797
Threads: 42
Joined: Dec 2008
City: Chicago, IL
Here's another example in great condition I picked up a few years back so I knew what it should look like. Can't wait to get a closer look at the insides
[Image: https://farm2.staticflickr.com/1765/2920...9bd0_c.jpg]
(This post was last modified: 06-28-2018, 04:56 PM by Bob Andersen.)
Posts: 1,400
Threads: 70
Joined: Oct 2007
City: Linn Creek, MO
I'm guessing the original owner is no longer with us.
Steve
M R Radios C M Tubes
Posts: 797
Threads: 42
Joined: Dec 2008
City: Chicago, IL
I removed the front cover for cleaning and discovered a potential problem. There is a horizontal line burned into the face of the CRT. It must have been run for some time with a collapsed vertical. Just a think bright horizontal line in other words. Just how visible that will be when an image is displayed remains to be seen. Worst case scenario, I do have a spare CRT, but they don't grow on trees and I'd rather not use it if I don't have to.
[Image: https://farm1.staticflickr.com/835/29218...b7f8_c.jpg]
[Image: https://farm1.staticflickr.com/917/42186...c69b_c.jpg]
(This post was last modified: 06-29-2018, 02:24 PM by Bob Andersen.)
Posts: 7,249
Threads: 267
Joined: Dec 2009
City: Roslyn Pa
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 667
Threads: 11
Joined: Sep 2014
City: Bellmawr, NJ
may not notice ,,,once thee picture takes place,,,,,
Posts: 4,643
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
Is it tobacco tar or kitchen grease mixed with dust? I've seen plastic radios that had about the same look to them either way, except that grease is stickier, and doesn't stink as much. I have a Deforest Crosley console that was in the house of a chain smoker, the set smelled like an ash tray for the first two years that I owned it, then faded, the chassis still has an interesting patina though.
Regards
Arran
Posts: 797
Threads: 42
Joined: Dec 2008
City: Chicago, IL
I'm not sure what it is, but it's not sticky and there is an odor of cigarettes.
Last night I took a look inside and it's in pretty good shape.
I intend to do a basic power supply recap and try to power it up and get a raster. I'll complete the cleaning too now that the the CRT "head" is off.
[Image: https://farm1.staticflickr.com/834/28367...b4d5_c.jpg]
[Image: https://farm1.staticflickr.com/915/42518...91ed_c.jpg]
It's very dusty, but cleans up easily with compressed air and a damp rag.
[Image: https://farm2.staticflickr.com/1805/4251...7288_c.jpg]
[Image: https://farm2.staticflickr.com/1764/4251...94bb_c.jpg]
Here's the other end with the power supply, tuner and IF.
[Image: https://farm2.staticflickr.com/1827/4251...87cc_c.jpg]
(This post was last modified: 07-06-2018, 10:10 AM by Bob Andersen.)
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Eico 536 dead
|
The continuity works but ac dc does not. Its an east schematic but i cant figure it out.daveone23 — 09:08 AM |
Help understanding a 89 radio rebuild new guy
|
Gee! That is a great help, I can now see what I am looking for and it's crisp and clear and matches exactly the radio I ...Bruce B — 08:57 AM |
462ron
|
Hi Bruce, here is original Philco factory service info on your set from the Philco Radio Library at the bottom of this p...462ron — 07:49 AM |
462ron
|
Hi Rich, it should be easy to determine which pair are used for your phone using a meter. In my case, the red and green ...462ron — 07:36 AM |
Help understanding a 89 radio rebuild new guy
|
We have factory documentation for most models, indexed here:
That spreadsheet has many columns, so be sure to scro...DaleHCook — 07:13 AM |
Help understanding a 89 radio rebuild new guy
|
Do you have any strong interference source nearby?
Have you performed full alignment?
If you have not finished recap, ...morzh — 10:05 PM |
Help understanding a 89 radio rebuild new guy
|
Welcome to the Phorum, Bruce! I haven't had an 89 on my bench (yet), but I'm sure many other members will be happy to h...GarySP — 09:57 PM |
Help understanding a 89 radio rebuild new guy
|
This is my first post to this forum. I am here to see if I can find help bringing a Philco 89 121 back to life. I kno...Bruce B — 07:57 PM |
Restoring Philco 38-12 in a white wood cabinet
|
Today, after having finished alignment of the previous 38-12 in a veneered wood cabinet, I proceeded to the next 38-12 i...morzh — 04:05 PM |
Philco 39-116 radio and remote
|
Hi Ron,
Good idea on using the phone line. I'll have to check on the pairs because the former owners of the house were...RichG — 12:27 PM |
Who's Online
|
There are currently 2312 online users. [Complete List] » 1 Member(s) | 2311 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|