Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Any Philcos that contain asbestos?
#1

Howdy guys -

Are there any Philco radios that contain asbestos?

Thanks,
Paul
#2

This is a good question and as such, I split it into its own thread.

Offhand, I can think of several. The 1935 version of the 16RX control unit has asbestos inside the cabinet.

Most if not all of the little Transitone/Philco Transitone models with five tubes crammed onto a tiny chassis have a sheet of asbestos under the chassis.

And there are probably others which I can't think of right now.

--
Ron Ramirez
Ferdinand IN
#3

Thanks Ron!

Would that then include the 35' 16x console?  Naturally, I have one and would want to be aware.  

Is the sheet in these cases glued down to the cabinet?  

Paul
#4

I used to own the 1935 version of the 16X, and it had no asbestos.

In the sets I have seen that had asbestos, the sheet was generally stapled to the cabinet.

--
Ron Ramirez
Ferdinand IN
#5

I think when I got two of 40-120 (or 40-125) that I bought for Kirk at Sam's expense Icon_smile , cheap, to get Kirk a speaker, there was asbestos inside.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#6

41-226C ('The Sled') has it.

http://philcoradio.com/gallery2/1941a/#Model_41-226C
#7

Back then, they thought they were doing their part to prevent forest fires. Or urban fires.

I've heard of guys replacing the asbestos sheets with that gray high-temp engine gasket material. They made no mention as to how they disposed of the asbestos, however.

--
Ron Ramirez
Ferdinand IN
#8

Thanks for the info Ron. Very appreciated.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>