Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Model 70
#1

Good afternoon, I just got a Philco Model 70 from our local flea market today for $50. It is in pretty good shape but it looks like someone used polyurethane finish on the cabinet so it looks like I'll have to strip and refinish the cabinet at a later date. The speaker is good but under the chassis there was quite a few paper capacitors paralleled with the bakelite blocks so I removed them and the hideous grille cloth someone installed will have to go. The Mershon capacitors are still connected in circuit but I didn't power it up. The chassis is quite dusty but looks like it is in excellent shape. I checked the coils and found none with open windings which is common on this model--hopefully the radio will work after it is restored due to all the work done on it before I got it. I have photos attached and my cat Snowball was inspecting the radio too Icon_biggrin .  Ken


Attached Files Image(s)
               
#2

I have already forgotten by now how spacious the 70 under chassis is.

Not a bad buy for $50.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

Try some alcohol on the cabinet first before you strip it, sometimes people used to slob shellac on older pieces of furniture, though I don't entirely know why since it usually looks worse afterward.
Regards
Arran
#4

Thanks Arran, I'll try that before I go any further on the cabinet. I got done cleaning the top of the chassis, checked the tubes and polished the Mershon capacitors. I'll start restuffing the bakelite blocks later today--I noticed the 2 metal capacitor blocks are gone but I found out where they connected originally.  Ken
.


Attached Files Image(s)
   
#5

The top of the chassis cleaned up beautiful and the underneath is nice, too! Man, if you can salvage the finish on the cabinet, it'll be a great looker, to boot! Congrats! Does Snowball approve of the new appliance?
#6

I am pretty sure Snowball will only assess it from the point of view of acquiring a new scratch post, so as much as I like cats, I would tell him to stay away Icon_smile

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#7

Hello everyone, Snowball got to check it out for a short time before I brought it upstairs though I wouldn't have mind if she scratched the awful grill cloth that was put on it. When I got my 37-690 my brother and I got it upstairs quickly so the cat wouldn't scratch the cabinet. Snowball isn't allowed upstairs as it is where I display all my radios. After I get the chassis restored I'll start on the cabinet--it is a small cabinet so it shouldn't take too long to strip and refinish it. Ken
#8

The chassis looks great! Once the cabinet is done, it will look awesome. Please share pics when done.

Tony

“People may not remember how fast you did a job, but they will remember how well you did it”
#9

Nice set, Ken ... with the exception of that grill cloth!  That's gotta go!  Somewhere someones grandmother has a set of living room curtains with a big hole cut in them!  Take care, Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
First Radio restoration
Hi Tubeman, Welcome to the Philco Phorum.  Phamily Phriendly Pfun with Phine Pholks Phull of Philco Phacts. (See a p...MrFixr55 — 12:33 PM
First Radio restoration
You could post in the WANTED ADs section here on the Phorum and see if anyone has an RF generator that they want to sell...klondike98 — 11:55 AM
Zenith H725
Good ideas, thank you Arrange and Rich. I have the adhesive aluminum foil already and can try that immediately. More ...EdHolland — 10:18 AM
Graphics for majestic 1050 dial glass.
Murf; I found this thread on the ARF, the first photo has a pretty good view of the dial glass. Regards ArranArran — 01:12 AM
Zenith H725
hello Ed, how about that speacial tape used for ducting it's like foil or how about thin piece of aluminum roof flash...radiorich — 12:19 AM
Zenith H725
Ed; One material that I have seen, but never tried for this was material for making exhaust gaskets, it's similar to ...Arran — 11:42 PM
Zenith H725
I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM
The list of my radio & TV collection!
Magical chords of forgotten melodies, old nostalgic music on an old radio... Saturday night blues on the Mid-Waves on an...RadioSvit — 12:20 PM

[-]
Who's Online
There are currently 1741 online users. [Complete List]
» 2 Member(s) | 1739 Guest(s)
AvatarAvatar

>