Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Model 70
#1

Good afternoon, I just got a Philco Model 70 from our local flea market today for $50. It is in pretty good shape but it looks like someone used polyurethane finish on the cabinet so it looks like I'll have to strip and refinish the cabinet at a later date. The speaker is good but under the chassis there was quite a few paper capacitors paralleled with the bakelite blocks so I removed them and the hideous grille cloth someone installed will have to go. The Mershon capacitors are still connected in circuit but I didn't power it up. The chassis is quite dusty but looks like it is in excellent shape. I checked the coils and found none with open windings which is common on this model--hopefully the radio will work after it is restored due to all the work done on it before I got it. I have photos attached and my cat Snowball was inspecting the radio too Icon_biggrin .  Ken


Attached Files Image(s)
               
#2

I have already forgotten by now how spacious the 70 under chassis is.

Not a bad buy for $50.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

Try some alcohol on the cabinet first before you strip it, sometimes people used to slob shellac on older pieces of furniture, though I don't entirely know why since it usually looks worse afterward.
Regards
Arran
#4

Thanks Arran, I'll try that before I go any further on the cabinet. I got done cleaning the top of the chassis, checked the tubes and polished the Mershon capacitors. I'll start restuffing the bakelite blocks later today--I noticed the 2 metal capacitor blocks are gone but I found out where they connected originally.  Ken
.


Attached Files Image(s)
   
#5

The top of the chassis cleaned up beautiful and the underneath is nice, too! Man, if you can salvage the finish on the cabinet, it'll be a great looker, to boot! Congrats! Does Snowball approve of the new appliance?
#6

I am pretty sure Snowball will only assess it from the point of view of acquiring a new scratch post, so as much as I like cats, I would tell him to stay away Icon_smile

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#7

Hello everyone, Snowball got to check it out for a short time before I brought it upstairs though I wouldn't have mind if she scratched the awful grill cloth that was put on it. When I got my 37-690 my brother and I got it upstairs quickly so the cat wouldn't scratch the cabinet. Snowball isn't allowed upstairs as it is where I display all my radios. After I get the chassis restored I'll start on the cabinet--it is a small cabinet so it shouldn't take too long to strip and refinish it. Ken
#8

The chassis looks great! Once the cabinet is done, it will look awesome. Please share pics when done.

Tony

“People may not remember how fast you did a job, but they will remember how well you did it”
#9

Nice set, Ken ... with the exception of that grill cloth!  That's gotta go!  Somewhere someones grandmother has a set of living room curtains with a big hole cut in them!  Take care, Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM
Made mistake & did not label connection
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM
Made mistake & did not label connection
You'll have to forgive me, I am not sure what you mean.  Can you explain what you are really saying.  If anyone does not...georgetownjohn — 08:05 PM
Made mistake & did not label connection
Those are details better left to the ones who know. Maybe you disconnected the wrong end of the wire.RodB — 06:22 PM
Made mistake & did not label connection
Maybe this is starting to make some sense in my hard head.  Is this why the wire in question was not in the great Ron Ra...georgetownjohn — 04:34 PM
Made mistake & did not label connection
I was correct with the 6A8 pin connection's, 7 and 8 are connected to ground as well as the tube shield (the broken line...RodB — 02:41 PM
Made mistake & did not label connection
What does the dotted line representing that surrounds the tube in the schematic?georgetownjohn — 02:17 PM
Made mistake & did not label connection
Hello John, I have been there either label got lost or was not labeled ! Sincerely Richardradiorich — 02:15 PM
Made mistake & did not label connection
Sorry, it is a Philco 37-640.  Does that help?--Johngeorgetownjohn — 02:14 PM

[-]
Who's Online
There are currently no members online.

>