Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Cool Find/Looking for info
#1

Hey all! I found this beauty for $20 today and she plays! I'm amazed! She needs a new needle and is having some record return issues that need to be solved, but I've been impressed. Does anyone know what model this is? I found a model number in the body of the cabinet but haven't been able to find it anywhere online and it isn't in the lineup of models that I've seen for the year that this would likely be based on the model number. The number on the inside of the cabinet is part no. 51-313316.

I'm also happy to take suggestions on why the record return isn't engaging at all.

Thanks!


https://photos.app.goo.gl/bBmhYqygehb7PM88A
#2

Hi and welcome to the Phorum,
I couldn't find a pic of it w/model attach. What you are looking for (model #) is going to start w/a letter and have 3 or 4 digits after it. I believe the # you found is the part # for the cabinet. It may be located on a tag or stamped in ink on the chassis. Best guess is it's from about 1961 or 62.

GL

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

Honestly, I don't know where to begin to look for a model number. I can see a variety of part numbers, for tubes, the idler wheel, speakers, etc. There's a slip of paper in the back that details how to connect the external speakers and on that paper is TP60-0506 which I googled but haven't been able to find.

I've added some more photos to the link above.
#4

I know this is a very old post, but the question still remains. They DO NOT MATCH up. My 144 Philco has 4 bands and if you match up the dials the top Short Wave in the middle do not line up. The first two bands do I believe but the short wave will not track correctly.




Users browsing this thread:
[-]
Recent Posts
Philco Model 38-7: what caps & resistors do fail typically?
Since you stated earlier, you have a console 38-7XX.  They also had a 38-7T (table), and 38-7CS (chairside).  A very nic...GarySP — 01:18 PM
Part numbers to model cross
That I wouldn't know, but sometimes the radio document itself shows one, same as the capacitor cans' etc pinouts.morzh — 12:46 PM
Part numbers to model cross
Thank you morzh, that is exactly what I was looking for. Now , is there some where that shows pinouts for Philco power ...Jim Dutridge — 11:37 AM
Restoration of the Canadian General Electric A-87
Thanks for your help Michael. In fact, this video is only an intermediate result. Later I had to apply another tinting l...RadioSvit — 09:01 AM
Restoration of the Canadian General Electric A-87
Great job on the cabinet. PS. In the US notation, "kenotron" refers to specific type of tubes; we call re...morzh — 08:24 AM
Part numbers to model cross
This document has at least some tables of models and parts used. Example: Choke 32-7572, used in 604 radio. Search f...morzh — 08:19 AM
Restoration of the Canadian General Electric A-87
I also checked all the radio tubes on my Hickok 530 tube tester. The 5Z3 kenotron turned out to be faulty, all the other...RadioSvit — 08:02 AM
Restoration of the Canadian General Electric A-87
Well... While the varnish is drying up, I started repairing the chassis... Of course I started by replacing the pa...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM

[-]
Who's Online
There are currently no members online.

>