Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Zenith 10S-160
#1

I picked this up from an estate sale a few weeks ago. Yesterday I got it back from my radio tech, all renewed internally, and an RCA jack installed for hooking up my Bluetooth receiver.  It sounds real nice, and the tuner is quite good. It grabs onto a station, and it stays there. 

[Image: https://i.imgur.com/loRmiEP.jpg]

[Image: https://i.imgur.com/1qwgtQP.jpg]
#2

That's a beauty!

I don't hold with furniture that talks.
#3

good-looking radio!

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#4

That is a classy looker, hope it becomes a keeper. 

Paul

Tubetalk1
#5

Nice Zenith It should be a keeper for sure! Icon_thumbup Icon_thumbup Icon_thumbup
#6

The sound from this radio is pretty amazing. It must have a good speaker, matched well with the output section. Because music sounds really great on this radio.
#7

These Zs are pretty good sounding machines. They usually use that beehive doohickey around the speaker.
When I restored the 9-S-262 I really appreciate that: compared to the Philcos like 18, 111 (I intentionally omit 20 and priors) it sounds much better.
Of course then when you listen to 116X / 37-116 and such, it is next step up, though not as remarkable.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM

[-]
Who's Online
There are currently 2823 online users. [Complete List]
» 3 Member(s) | 2820 Guest(s)
AvatarAvatarAvatar

>