Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Any information would be nice "first philco"
#1

I picked up this radio on craigslist because i thought it looked neat and to have a piece of history in my house would be nice. Fist of all i'm 21 years old and i have no idea what this thing is much less what tubes are. I know i probably shouldn't have bought this thing but anyways. Can anyone tell me how to get thing thing going. The power cord was all broken so i replaced and now when i plug it in SOME of the the little glass bulbs (tubes i beleive) light up. Do the ones that don't light up need to be replace? If is there anywhere to buy more? Sorry if all the questions are dumb but i'm having a hard time finding any resources on how these things work. the guy who i bought this from said he was the original owner and that he listen to it throughout the 30's he believed. I would like to get this thing working just enough to hear something coming out. From what i have found online its a 19x can you tell me anymore? Attached is a picture. Thanks again guys

[Image: http://i326.photobucket.com/albums/k420/...C_0108.jpg]
#2

Hello and welcome!

First of all...Wow, what a find for your first Philco! The 19X in this cabinet is very hard to find and seldom seen. Congratulations!

A little more info here:
http://www.philcoradio.com/gallery/1933b.htm#l

I must advise you to not plug the set in again until the chassis has been thoroughly checked for signs of trouble. This will include, but not be limited to, replacement of the electrolytic capacitors. You will want to replace all of the electrolytic and paper capacitors in the set for safety and reliability if you intend to use the set on a regular basis. We can help you do all of that.

More info:

http://www.philcoradio.com/tech/plugin.htm

http://www.antiqueradio.org/powerup.htm

If any of the tubes are not lighting up, their filaments could be bad; and if so, they will require replacement. It would be unusual for more than one to be burned out, however. They will not light up like a bulb; they will only have a soft orange glow in the top center (and in the bottom center if you can see it).

There are lots of places that sell tubes and other parts, so relax. Icon_smile

I'm sending you an email regarding your set, also.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM

[-]
Who's Online
There are currently 3263 online users. [Complete List]
» 5 Member(s) | 3258 Guest(s)
AvatarAvatarAvatarAvatar
Avatar

>