Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Howard 901AP Radio/Phonograph
#1

I picked up this Howard 901AP radio/phonograph sometime last year.

[Image: https://www.dropbox.com/s/kl1518m41ic7ka....jpg?raw=1]

 It was not in great shape with the top of the cabinet broken and some small pieces of it were missing.  I primarily got it so I could try working on the phonograph having never worked on one before.  I did not post progress along the way so here is the link to the RESTORATION NOTES for anyone who is interested.  
The new piece for me was rebuilding the crystal cartridge.  I used a combination of Syl’s technique and that of a fellow, blackjack6934, on Youtube.  I’ll post the pics I have of the rebuild although as I mention in the notes, I forgot to take a photo of the fully rebuild cartridge before closing it up.   I was successful in being able to play records.  I’m uncertain as to how close the sound is to what it was originally, probably not as good but I’m happy it plays at all.
[Image: https://www.dropbox.com/s/d0hig60jaivsuy....jpg?raw=1] [Image: https://www.dropbox.com/s/4su4iyn6pr3g6y....jpg?raw=1]

[Image: https://www.dropbox.com/s/6hjh67v9330uua....jpg?raw=1]
The end product is here:
[Image: https://www.dropbox.com/s/onck8kd14gk726....jpg?raw=1] [Image: https://www.dropbox.com/s/7gfl53uzzxm862....jpg?raw=1]
#2

WoW  that turned out great bob   Icon_clap Icon_clap Icon_clap
pezio ? should ask kirk  he seams good at rebuilding crystals

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#3

Thx sam.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM

[-]
Who's Online
There are currently no members online.

>