Silvertone 6051 by Airking
Posts: 4,369
Threads: 410
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
https://www.flickr.com/photos/92577012@N...ed-public/
I have not used this set in a while, simple 6 tuber, extra tube helps. Funny how some sets get pushed to the back of your collection. I always liked the cabinet as to me it has a design that is very 1940's. Broadcast Band only.
Popped in a new grille cloth, looks nice under the wooden grill. Plays well and picks up my 250 watt beautiful music station very well. So will go with her for a week or so, I am making an effort to play through my sets, see what's playing well and what may need help or need to be moved.
Sometimes simple is good. Even in Radioland.
Paul
Tubetalk1
Posts: 1,277
Threads: 44
Joined: Nov 2017
City: Menlo Park
State, Province, Country: CA
That's a rather nice little set Paul
I don't hold with furniture that talks.
Posts: 4,369
Threads: 410
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Silvertone has gone downstairs, Atlas has come up, plays pretty well, fairly sensitive but needs a bit more volume, yu have to turn it up a bit but then it is fine.
Looks decent, Fred taylor did the case and he made a simple looking one look real nice, I like the rolltop look near the dial.
https://www.flickr.com/photos/92577012@N...252723475/
Paul
Tubetalk1
Posts: 3,122
Threads: 57
Joined: Apr 2011
City: Lexington, KY
That Atlas looks great Paul! I remember when you bought that one:
http://philcoradio.com/phorum/showthread.php?tid=14645
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 4,369
Threads: 410
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
After several hours of listening my opinion could use a little more bass from the speaker, a little thin sounding but crisp. Atlas looks better than sounds but that is OK.
I think I may bring up another for today.
Paul
Tubetalk1
Posts: 289
Threads: 42
Joined: Jan 2014
City: Jeffersonville
State, Province, Country: PA
Great looking sets!
I'm glad to hear I'm not the only one who cycles through a radio collection.
Paul
Posts: 4,369
Threads: 410
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Cycling yes, need to see how they are doing, my collection is too big for my home but small by most standards. Funny how your tastes change and you fall in love again with an old set you had for several years, if you do not find yourself enamored with it maybe time to move it to new home.
Paul
Tubetalk1
Posts: 1,455
Threads: 96
Joined: Jul 2012
City: Poughkeepsie, N.Y.
For me it would be very hard to part with any of my radios. I have loved listening to radio since I was very young about 7 years old. My grandmother would put on the Admiral radio in the living room and I would listen to it for hours! She always used to listen to 570 am the good guys on WMCA. I would fall asleep listening to it. To this day my Philco 38-116 console radio is on in my bedroom at night and it puts me to sleep. Especially in the cold months. I love radio! It's funny what you remember from your childhood..... meanwhile you do not remember what you had for dinner the night before.
Posts: 4,369
Threads: 410
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Oh yes know the feeling, did I feed the cat last week?
As long as there is something decent to listen to, the glow, the warmth, the sound of a voice, very comforting.
Paul
Tubetalk1
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
40-150 General questions
|
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM |
40-150 General questions
|
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM |
40-150 General questions
|
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM |
40-150 General questions
|
Hi Kevin,
No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM |
Who's Online
|
There are currently 2983 online users. [Complete List] » 3 Member(s) | 2980 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|