Hi, just joined the Phorum. I purchased a Philco 48-861 radio in beautiful condition. I assume it was made in 1948, but know little else. Googled and Googled....it appears that this model has no web presence. Has anybody heard of this one?
Appreciate the input.
Posts: 190
Threads: 8
Joined: Oct 2005
City: Lexington, SC
If that model number is correct we have a real mystery here!
Only saw a 48-461 in Riders. Richard
Thanks Richard. I'm sure it's correct, got it right off the sticker on the inside of the cabinet.
Thought I'd add a photo. Anybody seen this one before? My first antique radio. Philco 48-861. Looking for info, if anyone can help me out. Can't find anything on this model....thanks
Note from site admin: Sorry, but the photo which was attached to this post is no longer available.
Posts: 190
Threads: 8
Joined: Oct 2005
City: Lexington, SC
Doesn't look American. Could be Canadian but the styling looks European. Appears to have many bands. Beautiful cabinet, btw. Richard
rghines1 Wrote:Doesn't look American. Could be Canadian but the styling looks European. Appears to have many bands. Beautiful cabinet, btw. Richard
Yes, Shortwave (2.3 - 21.9) and AM. Has a loud hum (keep reading about replacing capacitors), but does pull in a couple decent signals. Can't get a lick of shortwave though.
Richard, did Philco make radios in Canada/Europe? I thought they only manufactured in the States (Phili?)
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Does it say "PHILCO" on front with "TROPIC" in smaller letters below that?
I believe you have a postwar Tropic there. Very cool, and many of these are quite unlike their USA radios.
Yes, Philco made radios in Canada, in London, and contracted with another company to make them in Australia.
More later...bedtime and I'm tired...hmmm, we need a smilie for "yawn."
--
Ron Ramirez
Ferdinand IN
Ron Ramirez Wrote:Does it say "PHILCO" on front with "TROPIC" in smaller letters below that?
I believe you have a postwar Tropic there. Very cool, and many of these are quite unlike their USA radios.
Yes, Philco made radios in Canada, in London, and contracted with another company to make them in Australia.
More later...bedtime and I'm tired...hmmm, we need a smilie for "yawn."
Sorry, should have mentioned, it most definitely is a tropic. 8 tube. Thanks for the input!
Posts: 205
Threads: 6
Joined: Jun 2006
City: Moundsville
State, Province, Country: WV
Can you post the complete tube line up?
The schematic for another Philco will probably match it.
These sets, as Ron mentions here on his site, were built to withstand higher humidty levels.
Carl
Northern Panhandle, WV
I will Carl, stay tuned...
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Your 48-861 looks like a progression of the 42-760 that came out in June 1941 for the 1942 season.
http://www.philcoradio.com/gallery/1942a.htm#ae
Philco of Canada also had this model in their 1942 lineup, but they called it Model 55T and sold it in Canada. The USA-made 42-760, like all Tropic models, was intended for export to Central and South America.
After the war, Philco offered a few Tropics in their 1946 lineup; the 46-860 was one of these. I do not have a photo of it, so I do not know if it looked like the 42-760 or more like your 48-861.
Now we know of the existence of a 48-861; a model I did not know of before this thread.
This line of Philco sets was closed out, as far as I know, by Philco's introduction of Model 53-960 in their 1953 lineup. Unlike the others mentioned previously, the 53-960 was sold domestically, and therefore is easier to find than any Tropic model.
--
Ron Ramirez
Ferdinand IN
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
American Bosch Model 802 auto radio
|
Hello again;
I found a model 838 car radio on Nostalgia Air under United American Bosch, http://www.nostalgiaair.org/...Arran — 09:32 PM |
New Philco Repair Bench
|
Morzh is correct. The repair bench on our website is an archived image of chuck’s original site. He no longer provides s...klondike98 — 05:32 PM |
Made mistake & did not label connection
|
Excellent information. It is all starting to come together now and your explanation really helped since I noticed that ...georgetownjohn — 04:39 PM |
Made mistake & did not label connection
|
Hi John,
I don't have this radio, but I can supply some info:
Based on your pic, pins 7,8 and 1 are used together, go...MrFixr55 — 02:02 PM |
New Philco Repair Bench
|
As far as I know, the Repairbench does not work, and has not been working in a while.
Chuck (we had that campaign looki...morzh — 01:33 PM |
Radio city products 664 schematic request
|
Need a schematic or manual for the 664. The 663 may be similar.daveone23 — 12:38 PM |
New Philco Repair Bench
|
Thanks Gary.dconant — 12:16 PM |
New Philco Repair Bench
|
I tried accessing the site through our library and got the same response. It's reported to our tech gurus. GaryGarySP — 11:50 AM |
New Philco Repair Bench
|
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM |
Made mistake & did not label connection
|
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires.
Why'n't you...morzh — 09:49 PM |
Who's Online
|
There are currently no members online. |
|
|