Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Faurbanks morse radios
#1

Hi fellas,
Just wondering if anyone knows how rare Fairbanks Morse radios are.
I currently have a 1936 9 tube cosole as well as a 1936 8 tube console.
Both have beautiful dials with smaller lit dials at the bottom of the larger oval multicolored dial.
Both are recapped and working good.
Have someone who wants to buy one in the worst way.
Might just keep both as they are quite rare around minnesota anyway.
Any opinions?
Murf
#2

They made a good set, not too many cheapies that Fairbanks Morse did. So if you feel it is going to a good home maybe OK to sell one, I do not see many around the Northeast. It all comes down to will it be appreciated, and enjoyed at the new home. 

Paul

Tubetalk1
#3

Not sure how rare they are, as I do see them pop up from time to time on the 'bay, but they generally command a sturdy price when they do, due in no small part, I'm sure, because of their beautiful dials. Here's mine:

   

Incidentally the Fairbanks-Morse company is still very much in business in Beloit, WI. They no longer make radios, however: https://www.fairbanksmorse.com/

Greg V.
West Bend, WI
Member WARCI.org
#4

Nice Indianapolis made radios that aren't very common, especially with the Turret Shield and 22" metal speaker expander still in place.  As mentioned they have beautiful dials that are colorful and many have the two smaller dials at the bottom of the main dial:

   

I had an 8A console that I foolishly sold years ago and it took me 20 years to find another nice one.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#5

Thats the one i just finished restoring.
Awesome dial and a great player for an 8 tube.
Murf
#6

Not too common out here in the Pacific Northwest, either.

I found a Fairbanks Morse 8218 tombstone in a collector's offerings locally and snatched it up. Other than that, I've seen maybe 2 F.M. consoles in 6 years of looking, and that's it. One down in Eugene, OR (6 hrs south), and the other out past Spokane, WA (5+ hrs east). So pretty far-flung, no others that were local.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM
Philco 42-1008 conversion kit
I read about a kit to convert the variable speed changer in the Philco 42-1008 into a single speed unit.  That would rem...alangard — 09:30 PM
HiFi (Chifi) tube amp build - but my own design.
Tim Well...a chassis is metal. Magnetic or not, it does not matter. A transformer has some hum to it. It is natural. Th...morzh — 08:40 PM
Hickok AC51 tube tester
I thought the 83 tube was bad because it looked white but it tests strong. Blue gassy though. I checked the fuse, it was...martinj — 08:37 PM

[-]
Who's Online
There are currently no members online.

>