Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

46-480 questions: style of grill cloth and do repro pushbutton clear covers exist?
#1

Hi all!
New to Phorum and restoring a 46-480.  What style grill cloth is needed, and do the clear covers exist for the pushbuttons?  From what I’ve seen so far those appear to be made of that most precious material known as unobtainium...
#2

Welcome to the Phorum!
Icon_wave

I don't have one of those, so can only look at pictures but the grill cloth looks to be a pretty plain affair and since the wood slats cover most of it I think you have a lot of latitude in finding something that will look nice. If it were mine, I'd look at Kenneth's Goldenrod or English Tweed as possibles.

I don't know about any clear covers for your model. I bought some clear covers for the 48-482 buttons from David Frush
#3

Thank you, Bob!!!   I appreciate the answer!   The Philco is my 4th restoration.  First was a DuMont hi-fi; it was pretty simple.  It's from 1954 and has a plug on the back to input what I guess would have been a reel to reel tape player in the day.  You turn the knob to auxiliary input.  We input our CD player into it. 
Second was a Lowe Opta Atlanta model AM/FM/Shortwave W. German model with a Perpetual-Rex record changer.  Completely recapped, a couple of burned resistors replaced, did a work around on the old Selenium rectifier.  
Third was an RCA table top AM radio, a 56x5.   Complete recap, but terror of terrors, this one had been "fine tuned" by someone else...it was the winner not only of the Golden Screwdriver award, but the Golden Screwdriver with Diamond clusters.  I thought I'd never get it back to matching up the dial!!!!




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 38-7 Speaker
I have let this one sit because of other duties. Now I am back, and I have a couple of questions. I hooked up a Hammond ...tludka — 05:34 PM
Philco 42-390, code 121 speaker
>>A closer examination of the very small print schematic indicates that the speaker is a PM type. This shows a ...morzh — 05:18 PM
Philco 60 Squealing
Litz is typically tinned by simply rubbing it with the soldering iron tip while immersed in solder (and a bit of rosin f...morzh — 05:14 PM
Philco 6K7
The suppressor grid (if by G3 you mean the S) is usually at the Cathode potential, which in this caes is GND. I am not ...morzh — 05:10 PM
Philco 16B Parts
Thanks for the reply. Unfortunately the radio was removed before bidding was over so I didn't get a chance to bid.dconant — 04:10 PM
Philco 16B Parts
Hi Dan, Mike is correct, there's a lot of painted stuff on the chassis but it looks pretty good. The sm is all there,sp...Radioroslyn — 03:50 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Hi Cap'n Clock, Unfortunately, I do not have this radio.  This is a shame because this should be a good performer.  2A...captainclock1988 — 03:43 PM
Philco 42-390, code 121 speaker
Using a 5W  1.5k  ceramic resistor in place of the field coil and using a 4 ohm PM speaker, I was able to bring the radi...Stevelog — 02:57 PM
Philco 60 Squealing
I have taken out the 2nd IF and found a problem or not. I believe the coils are litz wire. There is a very small strand ...dconant — 02:13 PM
Philco 6K7
I am restoring a Philco 37-60. The am reception is very good, but the shortwave is very weak. Run 6 Philco removes the g...bobbyd1200 — 01:35 PM

[-]
Who's Online
There are currently 5563 online users. [Complete List]
» 3 Member(s) | 5560 Guest(s)
AvatarAvatarAvatar

>