Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Grill Cloth for Philco Model 51B Cathedral Radio
#1

Hello, I am trying to locate grill cloth similar to the pattern in the attached photo. Any assistance is much appreciated. Thank you.
John[url=https://mail.aol.com/webmail/getPart?uid=AFlb9goAAAERWtX-BwyqMExQ1pk&partId=2&saveAs=DSC01494.JPG&scope=STANDARD][/url]


Attached Files Image(s)
   
#2

That isn't the original cloth used in the 51B.

The original cloth looks the same as the cloth used in models 70 and 90, as well as most other Philco cathedral radios made from 1931 - 1933.

Radio Daze: http://www.radiodaze.com/grille-cloth-02-item-grc02/

--
Ron Ramirez
Ferdinand IN
#3

Ron , Thank you for the quick reply. I apologize for stating the incorrect model number. The photo on the tube shield states models 51 or 51A. I think the grill pattern is called a centered "drape" pattern.
 
If this exact pattern is no longer available, can you suggest one that would be appropriate for this model? 
Thanks again,
John
#4

I already have in post #2, this thread. The cloth you have is old, but is not original to the radio.

--
Ron Ramirez
Ferdinand IN
#5

The Radiodaze link Ron posted is the grill cloth you want. Welcome to the Phorum!
Icon_wave.
#6

I’m very surprised to learn that it is not the original cloth. It appears to be made for this radio as the pattern sweeps from the center of the opening. It is at least 60 years old, as it has been the same since I was a child. I’d like to continue to use it, but unfortunately it has a tear, that I do not think can be repaired. 
Thanks for the information.
John
#7

John

I wasn't (and am not) trying to be mean, really. I was simply pointing out a fact - the cloth you have is not original to the radio.

I did mention that

Quote:The cloth you have is old, but is not original to the radio.

Given that your 51B is 86 years old, it is quite plausible that the original cloth could have been replaced with what you now have 60-75 years ago.

--
Ron Ramirez
Ferdinand IN
#8

That cloth looks like either an RCA (also C.G.E in Canada) but I think some Brand Z models also used similar stuff.
Regards
Arran
#9

Thanks Arran. I would really like to find the same pattern, but I don’t think I will.
John
#10

I have a couple of Canadian-built RCA Victors that use that cloth.
#11

I know that one of mine does for sure , it's an RCA-Victor 95T2 from 1939.
Regards
Arran




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM

[-]
Who's Online
There are currently 4113 online users. [Complete List]
» 1 Member(s) | 4112 Guest(s)
Avatar

>