Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
Ron, I understand..Not blaming Chuck.. I'm sure that was all he had.. But I was hopeing he had more..
This thing is such a mess that I need as much info and parts layout I can get..Otherwise its going in garbage..
That would be a shame as the Case is really in great shape.. But getting frustrated
Skip
Posts: 184
Threads: 3
Joined: Feb 2018
City: Chesapeake VA
I have a unrestored PT-30 I can shoot a pict of wiring. I believe tube lineup is same.
Tom
Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
Tom, Ok thanks .. I will send you a PM with my email address..
Thanks
Skip
Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
Still changing wires.. found many more crumbled.. looks like a complete rewire job.. NOT FUN..
Keeping me busy on these Long Snowy Nights.. Supposed to get 3-6 inches more tonight..
Skip
Posts: 15,811
Threads: 553
Joined: Oct 2011
City: Jackson, NJ
That's what they promise.
It is mostly raining here now but looking like a bit of snow while it is falling, though it is melting while falling.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
Ok I have a question.. The Cap across the AC line Part 25 Says its a .04 Should that be replaced with a Y2 or X2 cap.. I have a X2 at .047.. I know I can probably due away with it also..
[Image: https://farm8.staticflickr.com/7912/4733...ca82_b.jpg]
What do you guys think ?
Skip
Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
That's FBOM. It's just there to filter rf noise out before it get into the set. These days there's a lot of noise so not all that effective.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
(03-09-2019, 10:31 PM)Radioroslyn Wrote: That's FBOM.
Я этого не понимаю. What is FBOM? 
--
Ron Ramirez
Ferdinand IN
Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Ham logo Fine Business Old Man.
In short OK.
Similar to GLOM
Good Luck Old Man
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
(This post was last modified: 03-09-2019, 11:10 PM by Radioroslyn.)
Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
Ok, Finished up the wiring .. Not the greatest job.. But radio works Great..
[Image: https://farm8.staticflickr.com/7921/4672...62a4_b.jpg]
When first powered on I had terrible motor boating across the band.. I forgot to Ground 2 of the tubes.. The 7B6 and 7B7.. After grounded set works with NO hum and no more motor boating.. On to alignment..
Skip
Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Looks good!
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 4,381
Threads: 412
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Looks pretty tightgly packed under there, nice work. 
Paul
Tubetalk1
Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
Here is the finished radio.. Looks pretty good . Plays great..
[Image: https://farm8.staticflickr.com/7862/4744...6555_b.jpg]
On to the next..
Skip
Posts: 4,381
Threads: 412
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Looks very fine indeed. So patience paid off! Good job! 
paul
Tubetalk1
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Yes. Fine job, Skip, fine job. 
--
Ron Ramirez
Ferdinand IN
Users browsing this thread: 10 Guest(s)
|
|
Recent Posts
|
|
Shadow Meter Bulb
|
| Not sure if anyone has tried this but there are 6.3 volt miniature lamps in bayonet and screw-in base options available ...GarySP — 11:31 AM |
|
Shadow Meter Bulb
|
| Any 6.3 volt pilot light will work. I would use the brightest one I could find in my workroom. Be sure the dial is clean...RodB — 10:45 AM |
|
HiFi (Chifi) tube amp build - but my own design.
|
| Tim,
nice write up and thanks for sharing !!
Sincerely Richardradiorich — 02:47 AM |
|
HiFi (Chifi) tube amp build - but my own design.
|
| Well, this was a real "Hum-Dinger" :lol: ! This will be kinda long, but hopefully it will help others having t...TV MAN — 01:55 AM |
|
Shadow Meter Bulb
|
| Phorum members, I am trying to find the bulb # for PHILCO Shadow Meter part number 45-2180 that is from a 37-640 chassis...georgetownjohn — 06:53 PM |
|
Philco 41-608 changer coupler
|
| 3D-printing...short of machining, of course.
Or molding.morzh — 05:20 PM |
|
Philco 41-608 changer coupler
|
| Thanks, Morzh.
That solves the issue of the rubber pieces. Now, I need to find a way to replicate the pot metal piec...alangard — 05:07 PM |
|
12' Philco
|
| If it is 12', either Kareem or Andre would have to jump pretty high to look at the front panel.
Kareem would have an e...morzh — 01:48 PM |
|
12' Philco
|
| And here's a story about the tires on the truck. Same "no-stoop" guy must have installed these! Take care a...GarySP — 01:17 PM |
|
Hickok AC51 tube tester
|
| I think they have only shown the secondaries of the transformer.
Two of them feed the rectifiers' filaments.morzh — 12:58 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
