Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Grundig 3068 Hi-Fi Zauberklang
#1

I found this today for cheap.  Everything works, except the EM34 tuning eye tube.  It's been playing in a guy's garage for years. He purchased it in Germany in the 1950's. 

I'm always amazed when I see these radios....they are huge.  It sounds great, and the tuner is very sensitive. The cabinet is very clean, as is the dial. There just a small bit of laminate separation at the bottom of one side, that I will be gluing down. 

My first old German radio.

A bunch of odd looking jacks in the back. Can any of these be used to plug in an MP3 player or Bluetooth receiver?  what sort of plugs would it take?

Is there a manual in ENGLISH for these?

Thanks

Grundig 3068 Hi-Fi Zauberklang
[Image: https://i.imgur.com/x9r3Mxa.jpg?1]
#2

Deutchse Intstiut Normung forgive my spelling, usually these have a DIN type jack, my Grundig does, try something like this...............

https://www.amazon.com/TNP-Converter-Equ...4675&psc=1

More info..............

https://en.wikipedia.org/wiki/DIN_connector

My pal Ross who is a Euro Radio Whiz explained to me once that the reason German Engineers get so much performance from minimal tube counts is that radios in Germany were taxed on the amount of tubes they had, so if you keep tube count down you could sell for less. 

My Grundig plays well but the laminate is cracking and pulling off, another one sounds better than looks. 

Good luck. 

Paul

Tubetalk1
#3

I don't see a 5 pin DIN socket. Here is whats back there:

[Image: https://i.imgur.com/4dJCwXj.jpg?1]

[Image: https://i.imgur.com/0CBbZNy.jpg]
#4

How bout this/

https://www.ebay.com/itm/Emud-Grundig-Ra...2816358401

Maybe you can translate the other connector text. 

If no more answers here you can pm me and I can see if I can put you in touch with someone who would know. 

Paul

Tubetalk1
#5

Thanks. I do believe that's what I need.
#6

Hmm - I don't think those are all DIN connectinons. The plug has an outer shell - and I don't see a circular groove around the sockets labeled "HiFi Strahler" and "Fern Dirigent"

Using these terms, I found this thread on the UK vintage site:

https://vintage-radio.net/forum/showthread.php?t=104996

It seems the HiFi socket is an output, and the other was for a remote control system.

The "Tonbandergerat" connection is a DIN type for a tape recorder, and is the most likely possibility to connect a music source. Aufname and Weidergabe translate as recording and playback, suggesting that the radio could be used as a source, and high quality means of listening to recordings.

I don't hold with furniture that talks.
#7

The tuner on this radio is quite good. It is picking up stations quite clearly that my other radios struggle with.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently no members online.

>