35-1285 Record Changer Repair
Posts: 7
Threads: 1
Joined: May 2019
City: Wylie
State, Province, Country: TX
05-15-2019, 11:15 AM
Hi all! I'm new to this forum, but have been a Philco Collector for about 30 years. I'm currently working on a 42-1008 console with a non-functioning record changer. I feel pretty dumb about this, but I need to remove the turntable and can't seem to figure out how to get it loose from the changer mechanism. I've tried pulling up on it, but it seems to be firmly attached to the base. I suspect that it is fairly easy to get off. The Philco Record Changer Manual says only "remove turntable".
I suspect that this may have been covered in a previous post, but my searches haven't turned up anything useful.
Posts: 5,584
Threads: 291
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
I can’t answer your question but...
Welcome to the Phorum! 
Posts: 18,427
Threads: 622
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Possibly Kirk could help.
Kirk!!!
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 816
Threads: 25
Joined: Mar 2014
City: Louisville, KY
On my 48-1256, there is a machined screw with a 5/16" hex head holding the platter on. It's screwed horizontally into the brass bushing that the platter spindle is in, ( underneath the changer base). Look and see if yours has a similar screw. This model has the cute, small 6" platter, and if yours has the same, it probably also has the same screw.
(This post was last modified: 05-15-2019, 08:24 PM by Jake Blake.)
Posts: 7
Threads: 1
Joined: May 2019
City: Wylie
State, Province, Country: TX
Jake - I don't see any kind of set screw. My turntable is almost 10" in diameter. I do see a nut at the very end of the spindle (underneath). I've been reluctant to remove it, because it looks like it holds a lot of stuff together, but will give it a go...
Posts: 7
Threads: 1
Joined: May 2019
City: Wylie
State, Province, Country: TX
Posts: 816
Threads: 25
Joined: Mar 2014
City: Louisville, KY
"Jake - I don't see any kind of set screw. My turntable is almost 10" in diameter. I do see a nut at the very end of the spindle (underneath). I've been reluctant to remove it, because it looks like it holds a lot of stuff together, but will give it a go..."
Okay. I'm seeing this late, but yes, it sounds like a different set-up, so use caution. Good luck bud!
Posts: 7
Threads: 1
Joined: May 2019
City: Wylie
State, Province, Country: TX
OK, let me try this another way...
I posted a different thread earlier this month asking for help removing the turntable on my 35-1285 record changer. I'm a little puzzled, because I got almost no response to the post. I know there are lots of people out there who have worked on the Beam of Light changers (although I will admit that most of the internet stuff that I've found on this subject was written 10-15 years ago). My changer is in a model 42-1008 code 122 console.
In any case, the problem is pretty basic. The Philco repair manual says simply "remove the turntable". I've tried prying, hammering, and cussing, and so far all I get is about 1/32" up and down movement of the turntable. I'm afraid to pry too hard, for fear of cracking the cast turntable or damaging the spindle. It's like there's a hidden c-ring or something, that keeps the turntable locked on the spindle. My suspicion is that the turntable is supposed to lift off easily, but has gotten frozen to the mating parts from years of rust or gummed up lubricants.
Everything else on the changer seems to be in surprisingly good condition (except for the rubber parts, which have cracked and fallen off, or have turned to sticky gum.
I any case, I desperately need advice, before I break something....
Posts: 2,579
Threads: 338
Joined: Jun 2013
City: lawrenceville nj
I don`t know about the 35-1285
but all the bol`s I had platter just pulled off they just sit on a pin
if you moved it try a little pb on shaft go up then down few times
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Hi,
I have merged both of your posts into this thread.
Please read the Phorum Rules here:
https://philcoradio.com/phorum/showthread.php?tid=4586
Multiple threads on the same subject are not allowed per Phorum Rules.
A lot of our restoration experts were at Kutztown earlier this month. Now it's a holiday weekend. Hopefully someone will chime in soon with some helpful advice. Edit: Someone already has while I was typing. 
Thanks for your patience.
--
Ron Ramirez
Ferdinand IN
Posts: 816
Threads: 25
Joined: Mar 2014
City: Louisville, KY
" . . . I(n) any case, I desperately need advice, before I break something.... "
I have one more idea on this.
Is the platter spinning freely? If it ISN'T, try pointing a heat gun at the bushing underneath to see if that loosens solidified lubricant that could be holding the platter on.
. . . although, frankly, I don't think this has been a problem with changers of this vintage. It is mainly known to affect BSR changers from the 70s.
Posts: 7
Threads: 1
Joined: May 2019
City: Wylie
State, Province, Country: TX
Sorry, Ron. I wasn't thinking. I'll do better in the future 
Posts: 7
Threads: 1
Joined: May 2019
City: Wylie
State, Province, Country: TX
Jake - Thanks for the suggestion to apply heat with a heat gun. I heated it for about a minute (from the top, aimed at the base of the spindle) and then used a pair of large flat-blade screwdrivers to pry up on the turntable platter. It took a little more force than I was comfortable with, but it did free itself from the bushing and popped off. Looks like it was held on by petrified lubricant. Nothing broke! What a relief! Thanks again, and thanks to everyone who responded.
I have done some basic tests on the Beam of Light arm, and so far it looks like everything works, but I'll have to do a lot of work before I can be sure. Every piece of rubber will have to be replaced, and there are lots of rubber parts on this thing...
Posts: 816
Threads: 25
Joined: Mar 2014
City: Louisville, KY
"Looks like it was held on by petrified lubricant"
YEEAAAAH! Great bud! 
Posts: 2,579
Threads: 338
Joined: Jun 2013
City: lawrenceville nj
Ramjet
Every thing may seam good
But photo sensor will not produce sound Properly
And most likely need replacement
Sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
HiFi (Chifi) tube amp build - but my own design.
|
| It's the other forum. I'm also in DIY, but mostly read there. Honestly, I kinda jumped into this without much thought to...TV MAN — 10:43 AM |
|
Philco 71 Code 125
|
| Hello,
I am in need of a schematic for this radio. Mine has the three separate circular tube shields and a shadow me...dconant — 08:06 AM |
|
Stromberg Carlson 1500 Squeal
|
| And life just keeps getting more complicated.dconant — 07:57 AM |
|
54C Complete Teardown/Rebuild
|
| Hello Roy,
here is this one
sincerely Richardradiorich — 12:45 AM |
|
54C Complete Teardown/Rebuild
|
| Richard,
Had grabbed it already but thank you just the same. I find myself wanting to find some way to block out the...glyphmon — 12:03 AM |
|
54C Complete Teardown/Rebuild
|
| Hello roy,
here is a link to the schematic .
Sincerely Richardradiorich — 11:54 PM |
|
54C Complete Teardown/Rebuild
|
| Richard,
The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM |
|
Preliminary work on wife's Silvertone 2014
|
| Did an alignment today which was interesting. IF alignment went great, almost all was already spot-on. Adjusting on th...glyphmon — 11:35 PM |
|
54C Complete Teardown/Rebuild
|
| The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM |
|
54C Cabinet Refinish
|
|
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM |
|
Who's Online
|
There are currently 1591 online users. [Complete List]
» 2 Member(s) | 1589 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
