Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco at Mammoth Cave National Park
#1

I pulled this from MCNP archives it was taken in 1939. Philco was extremely popular here in south central Kentucky specially the mammoth cave area.
Photo description.
Guide and a young woman standing at a Philco radio in Snowball Dining Room 1939 MCNP.
   
#2

Very cool!    Never gotten to MC.    Thanks for sharing.
#3

So cool but never.... I am way too scared of spaces like that..

:p

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

Looks like it was in a cave...……Any reception down there?? Blank
#5

I've been down there, it's 267 feet below ground level. If they got radio reception down there I'd buy everyone lunch. Icon_wink
#6

Philco claimed it picked up stations down there.
#7

Westinghouse claimed it also. 
   
#8

The radio might have been underground but I suspect there was a (really) longwire antenna involved. Icon_biggrin
#9

Kirk wrote:
So cool but never.... I am way too scared of spaces like that..

Me tooo!! My chest got a little tight just looking at that pic!!




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM

[-]
Who's Online
There are currently 3234 online users. [Complete List]
» 5 Member(s) | 3229 Guest(s)
AvatarAvatarAvatarAvatar
Avatar

>