Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 16L pilot lamps
#1

My 16L was butchered when I got it. There appears to have been 3 pilot lamps, all #46s. One is to light up the shadow meter, one goes on the back of the movable portion on the band indicator, but I cannot find reference to, nor pics of, where the 3rd one attaches. Does anyone have an idea?

Thanks,

Pat
#2

I'm seeing 5 all together, 1 for each band and one for the sm.
This presumes that it's a 4 band set. The 5 band set only has 2 lamps.
You didn't state how many bands your set has.


Attached Files Image(s)
   

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

Sorry, Terry. It's a 5 band. So if the 5 band only has 2 lamps, someone at sometime, for some reason, wired a 3rd lamp in the circuit. Makes sense now.

Thanks,

Pat
#4

The only thing I can think of is perhaps it may fit into the cabinet to backlight some part. If the wire matches the rest of the set then maybe if it doesn't then I would remove it.
I think Ed H has a 16L.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#5

No, the wire was different. It was actually soldered directly to the bulb, rather than using a socket. Since it was a bayonet, and the others are screw type, they probably didn't have a bayonet replacement for a burned out #46 for the dial. The SM bulb was still good. I'll go with that reasoning.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 89B code 123 newbie
Hi all and thanks for the great responses!  I went with a can left over from another radio, kinda scratched up but it do...Kurt P — 04:35 PM
Clear Schematic for 41-255
AH Just noticed 1 error on my cleaned-up schematic... Part # 27 - the 8uf electrolytic cap...The lead that is marked RE...patrician56 — 04:10 PM
Clear Schematic for 41-255
Hi Ross, I don't know if you still need a clear schematic for the 41-255 but here is one that I cleaned up. I added pin...patrician56 — 03:45 PM
AC/DC Transformer-less Sets
Joseph,   Thanks for the follow up. MrFixr55,   Thanks for the info. I was aware of the "Current Wars"...PeterN — 03:32 PM
AC/DC Transformer-less Sets
Fantastic report, Mr. Fixr! I had never read about AC/DC sets originally running at a higher price than AC-only models, ...jrblasde — 01:21 PM
49-504
Also wheni first power on the 7a8 gets very bright more than normal not sure what I did wrongphilco4me — 12:53 PM
49-504
Hello all I am doing a 49-504 and in section 4 I see C401is that a 5mmf ? I did not see that when I replaced the caps. ...philco4me — 12:47 PM
Looking for place to donate unique Philco Philco J-1930 Prototype
Thx for the description. I thought that it had to have a single 10 - 12" Sensor. Congrats on restoring the GE and...MrFixr55 — 10:12 AM
AC/DC Transformer-less Sets
Some of the original Edison DC generators were in use until the 1940s. The NYC subway and electrified Long Island Rail ...MrFixr55 — 09:39 AM
Samlex heavy-Duty bench supply filter question
I suggest sticking with the original values. Depending upon the design if you increase the cap values too much the incre...DaleHCook — 08:55 AM

[-]
Who's Online
There are currently no members online.

>