Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Is it worth it?
#1

I have had for some time a Philco "Mystery" Remote Radio Control.  A Philco 39-116RX World's Fair radio just popped up some 2.5 hours from where I live.

Is it worth the effort to go 5 hours both ways to get it?  Do these remotes really work with the radios to change stations remotely?  Or, was it just a gimmick used by Philco to sell radios?

I'm pondering if it is worth the trouble.  Thanks for any insight.

Scott


Attached Files Image(s)
       
#2

The Mystery controls work below broadcast band the remote sends a series of pulses keyed by the telephone dial. There is a type 30 tube and a fil/plate battery inside the filament lights very quickly at the time of dialing. The receiver for the low frequency uses the loop antenna in the bottom of the radio, a thyratron tube to key a step transfer relay and a two phase motor to turn the appropriate mechanism.

The receiver and the transmitter have to be on the same frequency and are identified by a number, FWIR there are just a few frequencies. I also believe the Mystery box frequency or the radio can be tuned to match if they don't already.

Most problems are dried out bipolar AC cap at the motor as well as the usually paper caps in the low frequency receiver. I think the range is about 30ft and one wall in between...

There are ample documents online for this feature so it is no "Mystery" at all...

Be aware the dial and its escutcheon are made of Tenite and may be irreparable warped.

Get it working, impress your friends and neighbors, old cool stuff!

GL

Chas

Pliny the younger
“nihil novum nihil varium nihil quod non semel spectasse sufficiat”
#3

Me? No as I dont love the style but I did drive 6 hours once for a piece of crap grandfather clock radio. Icon_lol

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

You should be aware that is a 39-55RX, not a 39-116RX. Notice it is AM only. It's just a basic AM radio with the added novelty of wireless remote control. To me it wouldn't be worth the effort to drive 5 minutes both ways to get it for $5, but then again I really don't care for those sets. We all like different stuff, that's what makes this hobby so neat and interesting - there are different radios to suit everyone's likes. Icon_smile

--
Ron Ramirez
Ferdinand IN
#5

At least it's not in Diamond Oregon.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#6

Thanks all. Maybe if the seller is coming to where I live to visit his daughter (the same town). But, I won't go out of my way. Thanks again!




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
trying to identify this wire type
Thanks to all for the feedback. As Arran said, it is probably an older replacement and yes it has a grid cap so I will ...georgetownjohn — 09:32 PM
trying to identify this wire type
It's possible that the red wire, actually a grid cap lead, is a very old replacement, I can't remember seeing a pre 1939...Arran — 09:18 PM
Gilfillan Brothers Car Radio?
Hi everyone,  Special thanks to Joe Rossi for tracking down this obscure radio and thanks to others who took up the hun...Antipodal — 08:15 PM
trying to identify this wire type
Here's one source for your wire of many. Take care and BE HEALTHY! Gary P.S. Can't get the right color you need? I ...GarySP — 06:40 PM
trying to identify this wire type
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM
trying to identify this wire type
Greetings Phorum members, Hope you can help me identify this type of wire in the photo I have attached.  I am not sure ...georgetownjohn — 01:53 PM
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM

[-]
Who's Online
There are currently no members online.

>