Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

chelsea radio regenerative
#1

                i just wanted to show people my chelsea radio it is a regenerative with 3 knobs and one tube a c299.i don't see many of these around ,i have had this for 35 years and keep it in a curio cabinet.i have never tried to operate it.i bought it at a garage sale in homer illinois.
#2

Congratulations ! That is a very cool set. I am surprised you have never tried it. Years ago I bought a Radiola Sr. also a regenerative one tube radio. I have made a 22 1/2 volt B battery for it, and bought a replica A  battery for it, With a decent antenna and ground it is actually very sensitive and selective, and will pick up stations from hundreds of miles away.
[Image: https://66.media.tumblr.com/0e51fea78d53...1_1280.jpg]
#3

Love it!

The Chelsea is using a '99 adapter. That speaks to say it could use a WD-12, 200a, 201a..

Great replica batteries. Don't you just hate to use plastic covered modern wire for hookups... I certainly do, since Radiodaze is getting out of the parts biz there is little hope in finding battery harnesses and quality textile covered wire...

BTW, I need just one, maybe two of the Chelsea diagonally knurled battery nut for my Green Concert 2-step amp. It is a work in progress that could be helped by someone providing a picture of their amp.

Chas

Pliny the younger
“nihil novum nihil varium nihil quod non semel spectasse sufficiat”
#4

I'm really not that picky. I use modern wire for hooking up the batteries to the binding posts. Fortunately there are other sources for cloth covered wire. You can find them shown here in various posts. Here is one source, they carry quite a selection of colors:   https://www.tubesandmore.com/products/wi...cover-600v     They also carry other wire we can use, check this whole section:  https://www.tubesandmore.com/products/wire




Users browsing this thread:
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM

[-]
Who's Online
There are currently no members online.

>