Posts: 15
Threads: 8
Joined: Sep 2019
City: Eau Claire
State, Province, Country: Wisconsin
I have a 41-290 that I am restoring for someone. I am in the process of testing all the tubes in the unit. I have come across a problem with the type 37, 41 and 84 tubes in this unit. I am unable to test them in my Sencore TC28 Hybrider or B&K 747B testers. There is no socket that fits these tube.
How can I test these tubes so I know they are good/bad? Is there an adapter socket out there? Any help/knowledge is appreciated.
(This post was last modified: 01-30-2020, 05:01 PM by
rd48sec.)
Posts: 93
Threads: 20
Joined: Aug 2014
City: Greenville, TX
There is a ham radio club in your area. Someone will have the correct tube tester.
https://www.ecarc.org
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
Or if you are serious, buy a decent tester. A Hickok 600A would do.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 658
Threads: 8
Joined: Apr 2018
City: S. Dartmouth
State, Province, Country: MA
There could be octal equivalents for each of those tubes. Find known dead glass tubes with the octal base and pins needed to test the equivalent type. With octal sockets, wire from the pins of the old tubes to the equivalent salvaged octal tube base...
Saves buying an up dated tester. Some of the pin configurations may be the same so maybe three or two adapters needed...
Most online tube sites will have the characteristics knowledge to make the substitution. for test purpose the current rating of the filament may not be important.
The process will help expand tube knowledge...
"Teach a man to fish...."
Pliny the younger
“nihil novum nihil varium nihil quod non semel spectasse sufficiat”
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
The 747 is a good tester, I don't know about the other one.
Yeah, find someone with a good MC tester. Most of the Hickoks will do those.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 15
Threads: 8
Joined: Sep 2019
City: Eau Claire
State, Province, Country: Wisconsin
Thanks for the advice. I stopped in at my local electronics service place. They were able to test the tubes.
Both my type 41's are bad.