Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

'The Philco Curse'
#1

My friend came up with this term earlier this week as he handed me back my model 60 at his shop. Sadly, it has bad coils and will be a shelf queen for a while as no-one around my area seems able to rewind coils in these old radios. Even my late friend, who did know how to rewind coils, would not do Philcos! I know I don't have the patience or steady hands to dig the coils out and as I tinker with my model 90, I've read that even that famous and desirable model can have coil issues as well. All of this because Philco (and perhaps others) used celluloid in the coils, which they had no idea would decompose in such a way. Icon_evil My friend told me he has lost count on how many Philcos he has had to return to owners due to bad coils over the years. If he could do it, he would get those coils rewound, but so far no-one in our area does that. Yes, I have pondered giving it a whirl myself, but my right hand got a bit of nerve damage years ago when an antique hit and miss engine landed on it. It does fine most of the time, but when I need to concentrate or do fine work, it shakes like crazy! That's the reason why I usually have others handle the restorations for me. (Also, even when my hand stays steady, my soldering is scary! Icon_eek  ) Ok, I've rambled on long enough about this. Just bummed right now. I have a 60L console that was a parts beater that we had to rig a speaker into and it works, yet my rather nicely cared for 60B is a dud right now!

No matter where you go, there you are.
#2

"Just bummed right now."
February is enough to bum anyone ....bums me every year. It seems to always be the most-unlucky month for me. The worst month. Period.
I have some woes going on right now, myself, . . . but I'm not gonna unload them on you.  Just try to take heart in the fact that, even with an extra day, February is over with faster than any other month.   Heart
#3

Thanks, Jake. I can tell this month is getting to everyone really. I found out about my 60 having bad coils right after having to have the windshield replaced in my van. Got smacked by a stone off a Subaru on the way into work a week ago and by the time I left work a large crack had appeared going right down the middle from the top. That was $225 out of my pocket as I only have liability on it!

No matter where you go, there you are.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
New member
Hi. I specialize in refurbishing Predictas, but I'm in Chicago. If you can get it to me, I'd be happy to go over it. ...Bob Andersen — 06:43 PM
An attempt to remove the Field Coil from a G speaker
I have 3 G speaker, all with open Field coils. Today I pull one of the shelf and decided to try to remove the FC (spo...morzh — 06:07 PM
Philco 91 Restore Code ??
Thanks Mike. I will check them out.dconant — 05:52 PM
Philco 91 Restore Code ??
There is no such thing as bad Fluke. This said, they are expensive. A Fluke is easily 10x the price of comparable CCC...morzh — 05:45 PM
Philco 91 Restore Code ??
Hello Mike, Yes, I have 3 Fluke meters one being my first Fluke 77 and other being Fluke 87. My third is Fluke clamp -...radiorich — 05:04 PM
Philco 91 Restore Code ??
I knew that Fluke was the Cadillac so with that in mind what Fluke would you recommend I get?dconant — 03:53 PM
Philco 91 Restore Code ??
Yep. 10W is probably enough. Also, if the meter measures Farads, then it should also have that "Delta" button...morzh — 02:38 PM
Philco 91 Restore Code ??
I measured the current through the resistor I am using as a replacement for the speaker field coil and got 40ma. So that...dconant — 02:32 PM
Philco 91 Restore Code ??
No I'm not saying I don't own a DMM. I have a CCC one (Thsinde 18+). I forgot that could read caps. I did purchase a Flu...dconant — 02:28 PM
Philco 91 Restore Code ??
Are you telling me you do not own any decent DMM, that can measure capacitances from a few pF and up? Even todays CCC (C...morzh — 01:44 PM

[-]
Who's Online
There are currently 3970 online users. [Complete List]
» 1 Member(s) | 3969 Guest(s)
Avatar

>