Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

How rare is the 1st version model 18X?
#1

How rare is the 1st version model 18X console with 2 bands, Broadcast and shortwave (Police band, aircraft etc)?

Larry
#2

Hmmm, since I don't see a bunch of folks posting "I see them all the time." or "Quite common." I'm going to assume it's fairly difficult to find? Of course we all know what happens when we ASSUME. Icon_biggrin
#3

Well Larry,

Philco made 27,000 of those cabinets. Of that total, they were shared between models 14X, 16X and 18X as well as the following year's (1935 season) 18X, 49X, 118X and 144X.

Of those models, I would guess that the lowest number made would be 49X followed by 16X.

Then, assuming a 30% survival rate (again, guessing)...which would be 8,100 total of all seven model versions...

One thing is clear: Philcos in this cabinet style are not exactly common. Icon_smile

--
Ron Ramirez
Ferdinand IN
#4

Besides, it's a great looking cabinet! Snatch it up if not too pricey.
#5

Hi all     Is this the model you are talking about?
   
#6

Yes.

--
Ron Ramirez
Ferdinand IN
#7

Thanks for the info Ron. I wonder why the version changes in such a relatively short period of time; 1st ver BCB & Police/Aircraft, 2nd ver BCB only, and 3rd ver BCB & SW (diff frequencies than 1st ver). It seems odd. Icon_e_smile

Larry
#8

I like that cabinet. I'd love to find one of these locally.
#9

We were very lucky, then with our 16X find all those years ago.

I don't hold with furniture that talks.
#10

I found one last week, but it was in seriously horrendous condition. It would have been easier to make a new cabinet from scratch than fix it.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
trying to identify this wire type
Here's one source for your wire of many. Take care and BE HEALTHY! GaryGarySP — 06:40 PM
trying to identify this wire type
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM
trying to identify this wire type
Greetings Phorum members, Hope you can help me identify this type of wire in the photo I have attached.  I am not sure ...georgetownjohn — 01:53 PM
Philco 60 Squealing
All correct shields must be in place, all tubes correct no subs of any kind. Check any soldered, riveted ground conne...Chas — 01:24 PM
Philco 60 Squealing
I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM

[-]
Who's Online
There are currently 4281 online users. [Complete List]
» 2 Member(s) | 4279 Guest(s)
AvatarAvatar

>