Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

How rare is the 1st version model 18X?
#1

How rare is the 1st version model 18X console with 2 bands, Broadcast and shortwave (Police band, aircraft etc)?

Larry
#2

Hmmm, since I don't see a bunch of folks posting "I see them all the time." or "Quite common." I'm going to assume it's fairly difficult to find? Of course we all know what happens when we ASSUME. Icon_biggrin
#3

Well Larry,

Philco made 27,000 of those cabinets. Of that total, they were shared between models 14X, 16X and 18X as well as the following year's (1935 season) 18X, 49X, 118X and 144X.

Of those models, I would guess that the lowest number made would be 49X followed by 16X.

Then, assuming a 30% survival rate (again, guessing)...which would be 8,100 total of all seven model versions...

One thing is clear: Philcos in this cabinet style are not exactly common. Icon_smile

--
Ron Ramirez
Ferdinand IN
#4

Besides, it's a great looking cabinet! Snatch it up if not too pricey.
#5

Hi all     Is this the model you are talking about?
   
#6

Yes.

--
Ron Ramirez
Ferdinand IN
#7

Thanks for the info Ron. I wonder why the version changes in such a relatively short period of time; 1st ver BCB & Police/Aircraft, 2nd ver BCB only, and 3rd ver BCB & SW (diff frequencies than 1st ver). It seems odd. Icon_e_smile

Larry
#8

I like that cabinet. I'd love to find one of these locally.
#9

We were very lucky, then with our 16X find all those years ago.

I don't hold with furniture that talks.
#10

I found one last week, but it was in seriously horrendous condition. It would have been easier to make a new cabinet from scratch than fix it.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM

[-]
Who's Online
There are currently 476 online users. [Complete List]
» 1 Member(s) | 475 Guest(s)
Avatar

>